|
|
|
 Eleich, A.M., Megahed, M.M., Abdel-Kader, M.S., Ali-Eldin, S.S. and Abdel-Karim, M., “On the Initial and Deformation-Induced Anisotropic, Multiaxial Ratchetting and Supplementary Hardening of AISI 316 Stainless Steel at Room Temperature”. The International Seminar on Multiaxial Plasticity, France, 1-4 September, 1992.
|
|
Kobayashi, M., Abdel-Karim, M. and Ohno, N., “Interpretation of the OW Model As a Multi-Linear Model and Numerical Integration Method”. Proceedings of the 34th Symposium on Strength of Materials at High Temperatures, Kawasaki, Japan, pp. 114-118, 1996. |
|
Ohno, N., Abdel-Karim, M., Kobayashi, M. and Igari, T., “Characteristics in Strain-Controlled Ratchetting Deformation of 316FR Steel”. International Symposium on Plasticity and its Current Applications, Juneau, Alaska, 1997. |
|
Ohno, N., Abdel-Karim, M., Kobayashi, M. and Igari, T., “Strain Hardening of 316FR Steel in Strain-Controlled Ratchetting Deformation”. Transaction on the 14th International Conference on Structural Mechanics in Reactor Technology SMiRT, (Ed. Bu. M. Livolant), Lyon, France, Vol. 9, pp. 237-244, 1997. |
|
Ohno, N., Abdel-Karim, M., Kobayashi, M. and Igari, T., “ Ratchetting Characteristics of 316FR Steel in Strain-Controlled Ratchetting Deformation”. Transaction of the Japan Society of Mechanical Engineers, Series A, Vol., 63, No. 609, pp. 945-953, 1997 (In Japanese). |
|
Ohno, N., Abdel-Karim, M., Kobayashi, M. and Igari, T., “Ratchetting Characteristics of 316FR Steel at High Temperature, Part I: Strain-Controlled Ratchetting Experiments and Simulations”. International Journal of Plasticity, Vol. 14, Nos. 4-5, pp .355-372, 1998. |
|
Abdel-Karim, M., Ohno, N. and Mizuno, M., “Experiments and Simulations of Uniaxial Ratchetting of 316FR Steel at Room Temperature”. Pressure Vessel and Piping Codes and Standard, ASME/JSME, San Diego, pp. 283-289, 1998. |
|
Mizuno, M. Mima, Y., Abdel-Karim, M., and Ohno, N., “Uniaxial Ratchetting Characteristics of 316FR Steel at Room Temperature (1st Report, Experiments)”. Transaction of the Japan Society of Mechanical Engineers, Series A, Vol. 64, No. 627, pp. 139-144, 1998 (In Japanese). |
|
Abdel-Karim, M., and Ohno, N.,“Uniaxial Ratchetting characteristics of 316FR Steel at Room Temperature (2nd Report, Simulation Based on Constitutive Models)”. Transaction of the Japan Society of Mechanical Engineers, Series A, Vol. 64, No. 628, pp. 101-107, 1998 (In Japanese). |
|
Abdel-Karim, M., Mizuno, M. and Ohno, N., “Simulation of Cyclic Nonproportional Experiments of IN738 at 850 oC”. Proceedings of Third Sino-Japan Bilateral Symposium on High Temperature Strength of Materials, Nanjing, China, pp. 180-187, 1998. |
|
Abdel-Karim, M., Mizuno, M. and Ohno, N., “Simulation of Nonproportional Cyclic Experiments of IN738 at 850 oC”. Acta Metallurgica Sinica (English Letters), Vol. 12, No. 1, pp. 1-8, 1999. |
|
Abdel-Karim, M., Mizuno, M. and Ohno, N., “Simulation of Nonproportional Cyclic Experiments of IN738 at High Temperature”. Journal of Materials Science, Japan, Vol. 48, No. 2, pp. 104-109, 1999. |
|
Ohno, N., Abdel-Karim, M., and Mizuno, M., “Experiments and Constitutive Modeling For Uniaxial Ratchetting of 316FR Steel at Room Temperature”. Transaction on the 15th International Conference on Structural Mechanics in Reactor Technology SMiRT, Soul, Korea, 1999. |
|
Mizuno, M. Mima, Y., Abdel-Karim, M., Ohno, N., “Uniaxial Ratchetting of 316FR Steel at Room Temperature, Part I-Experiments”. ASME, Journal of Engineering Materials and Technology, Vol. 122, No. 1, PP 29-34, 2000. |
|
Ohno, N., and Abdel-Karim, M., “Uniaxial Ratchetting of 316FR Steel at Room Temperature, Part II-Constitutive Modeling and Simulations”. ASME, Journal of Engineering Materials and Technology, Vol. 122, No. 1, PP 35-41, 2000. |
|
Abdel-Karim, M. and Ohno, N., “Kinematic Hardening Model Suitable for Ratchetting with Steady State”. International Journal of Plasticity, Vol. 16, pp. 225-240, 2000. |
|
Attia, M.S., Abdel-Karim, M. and Megahed, M., “Shakedown Analysis of an Infinite Plate with a Central Hole under Biaxial Tension”. Proceedings of the Seventh Cairo University International Conference MDP-7 (Ed. Hassan M.F. and Megahed, S.M.) Cairo, Egypt, pp. 185-191, Feb. 15-17, 2000. |
|
Attia, M.S., Abdel-Karim, M. and Megahed, M., “Shakedown Analysis of a Finite Plate with Single Edge Notch Under Uniaxial Tension”. ASME, Reliability, Stress Analysis and Failure Prevention Conference (RSAFP), Maryland, Sept. 9-11, 2000. |
|
Megahed, M. Abdel-Karim, M. and Attia, M.S., “Numerical &Experimental Investigations on Shakedown Loads for Structures with Severe Geometrical Discontinuities. PVP-Vol. 430, Pressure Vessel and Piping Design and Analysis (Ed. D.H. Martens), Atlanta, July 22-36, pp. 59-66, 2001. |
|
Abdel-Karim, M., “Theoretical Investigation on Non-Isothermal Cyclic Plasticity”. Journal of Engineering and Applied Science, Faculty of Engineering, Cairo University, Vol. 50 No. 6, pp. 1145-1163, 2003. |
|
Abdel-Karim, M., “Verification of a Numerical Integration Method Based On Multiaxial Loading”. Proceedings of the Eights Cairo University International Conference MDP-8 (Ed. Metwalli, S. Mokhtar, M.O.A and El-Danaf, I.) Cairo, Egypt, Jan. 4-6, 2004. |
|
Abdel-Karim, M., “Evaluation of the Armstrong Frederick Type Plasticity Theories under Non-Proportional Loading”. Proceedings of the Eights Cairo University International Conference MDP-8 (Ed. Metwalli, S. Mokhtar, M.O.A and El-Danaf, I.) Cairo, Egypt, Jan, 4-6, 2004. |
|
Abdel-Karim, M., “Influence of Yield Surface Distortion on Prediction of Multiaxial Loading Conditions”. Journal of Engineering and Applied Science, Faculty of Engineering, Cairo University, Vol. 51, No. 3, pp. 593-612, June, 2004. |
|
Abdel-Karim, M., “Numerical Integration Method for Kinematic Hardening Rules with Partial Activation of Dynamic Recovery Term”. International Journal of Plasticity, Vol. 21, No. 7, pp. 1303-1321-2005. |
|
Abdel-Karim, M., “Theoretical Study on Creep-Ratchetting Interaction of SUSD304 Stainless Steel". Journal of Engineering and Applied Science, Faculty of Engineering, Cairo University, Vol. 52, No. 3, pp. 593-608, Jun 2005. |
|
Abdel-Karim, M., "Shakedown of Complex Structures According to Various Hardening Rules". International Journal of ressure Vessels and Structures, Vol. 82, pp. 427-458, 2005. |
|
Abdel-Karim, M., "On Creep Ratchetting Interaction: Assessment of Unified Theories". Proceedings of PLASTICITY 05: The Eleventh International Symposiums on Plasticity and its Current Applications, Kauai, Hawaii, Jan 3-8, 2005. |
|
A.S. Khan, Abdel-Karim, M., and Chen, X., "Ratchetting of OFHC Copper under Multiaxial Loading Conditions". Proceedings of PLASTICITY 05: The Eleventh International Symposiums on Plasticity and its Current Applications, Kauai, Hawaii, Jan 3-8, 2005. |
|
Abdel-Karim, M., "Assessment of Unified Theories in Simulating Creep-Ratchetting Behavior of Viscous Materials", The 18th International Conference on Structural Mechanics in Reactor Technology (SMiRT 18), Beijing, China, August 7-12, 2005. |
|
Chen, G., Chen, X., Kim, K.S., Abdel-Karim, M., Sakane, M., "Strain Rate Dependent Constitutive Model of Multiaxial Ratchetting of 63Sn-37Pb Solder". Transaction of the ASME, Journal of Electronic Packaging, Vol. 129, pp. 278-286, 2007. |
|
Khan, A. S., Chen, X., and Abdel-Karim, M. "Cyclic Multiaxial and Shear Finite Deformation Response of OFHC: Part I, Experimental Results". International Journal of Plasticity, Vol. 23, pp. 1285-1306, 2007. |
|
Abdel-Karim, M., "Modified Kinematic Hardening Rules for Simulations of Ratchetting". International Journal of Plasticity, Vol. 25, pp. 1560–1587, 2009. |
|
Abdel-Karim, M., "An extension for the Ohno-Wang kinematic hardening rules to incorporate isotropic hardening", International Journal of Pressure Vessels and Piping, Vol. 87, No. 4, pp. 170-176, 2010 |
|
Abdel-Karim, M., "An evaluation for several kinematic hardening rules on prediction of multiaxial stress-controlled ratchetting", International Journal of Plasticity, Vol. 26, No. 5, pp. 711-730, 2010. |
|
Abdel-Karim, M., and Khan, A.S., "
Cyclic Multiaxial and Shear Finite Deformation Response of OFHC Cu: Part II, An extension to the KHL model and simulations", International Journal of Plasticity, Vol. 26, No. 5, pp. 758-773, 2010. |
|
Abdel-Karim, M., "Effect of elastic modulus variation during plastic deformation on simulations of ratchetting", The 14th International Conference on Applied Mechanics and Mechanical Engineering, AMME-14, Cairo, May 25-27, 2010. |
|
Abdel-Karim, M., "Effect of Elastic Modulus Variation during Plastic Deformation on Uniaxial and Multiaxial Ratchetting Simulations", European Journal of Mechanics - A/Solids, Vol. 20, pp. 11-21, 2011. |
|