Reviewer for the International Periodicals

International Research Journals of Biochemistry and Bioinformatics (IRJBB).

Journal of Oceanography and Marine Science (JOMS), Academic Jourmnals, Open Access Journals.

Journal of Discrete Dynamics in Nature and Society (MPE), Hindawi Publishing Corporation.

Tamkang Journal of Science and Engineering (TKJSE), Tamkang University, Taiwan.

Journal of Applied Mechanics, Transactions of the American Society of Mechanical Engineers (ASME).

Journal of Energy Heat and Mass Transfer, India.

Engineering Applications of Computational Fluid Mechanics, The Hong Kong Polytechnic University.

Applied Mathematics and Computation, Elsevier Science, Ltd.

Yanbu Journal of Engineering and Science (YJES), Kingdom of Saudi Arabia.

Computer Methods in Applied Mechanics and Engineering, Elsevier Science, Ltd.

Acta Mechanica Sinica, The Chinese Society of Theoretical and Applied Mechanics, Springer-Verlag.

Selçuk Journal of Applied Mathematics, Research Center of Applied Mathematics, Selçuk University, Turkey.

International Journal of Energy & Technology.

Journal of Thermophysics and Heat Transfer, AIAA Technical Journals.

The ANZIAM Journal, The Journal of the Australian Mathematical Society.

Journal of Taiwan Institute for Chemical Engineers (JTICE), Elsevier Science, Ltd.

Journal of Agricultural Science and Technology, Tarbiat Modares University, Faculty of Agriculture, Tehran, Islamic Republic of Iran.

Journal of Mechanical Engineering Research (JMER Journal), Open Access Journals.

Computers and Fluid, Elsevier Science, Ltd.

Journal of Aerospace Engineering, Part G, Proceedings of the Institution of Mechanical Engineers (IMechE), Professional Engineering Publishing.

International Journal of Physical Sciences (IJPS), Open Access Journals.

Journal of Engineering in Medicine, Part H, Proceedings of the Institution of Mechanical Engineers (IMechE), Professional Engineering Publishing.

International Journal of Applied Mathematics and Computation (IJAMC), Open Journal Systems, India.

Journal of Mathematical Problems in Engineering (MPE), Hindawi Publishing Corporation.

International Journal of Thermal Sciences, Elsevier Science, Ltd.

Physica Scripta, International Journal for Experimental and Theoretical Physics, The Royal Swedish Academy of Sciences & Institute of Physics Publishing (IOP).

Journal of Engineering Manufacture (JEM), Part B, Proceedings of the Institution of Mechanical Engineers (IMechE), Professional Engineering Publishing.

Numerical Heat Transfer, An International Journal of computational and Methodology, Part A: Applications, Taylor & Francis Group, Inc.

Numerical Heat Transfer, An International Journal of computational and Methodology, Part B: Fundamentals, Taylor & Francis Group, Inc.

International Journal of Non-Linear Mechanics, Elsevier Science, Ltd.

Meccanica, Italian Association of Theoretical and Applied Mechanics, Springer-Verlag.

Journal of Computational and Applied Mathematics (CAM), Elsevier Science, Ltd.

Journal of Mathematical Analysis and Applications (JMAA), Elsevier Science, Ltd.

Scholarly Research Exchange, an Open Access Journal.

Journal of The Taiwan Institute of Chemical Engineers (JTICE), Elsevier Science, Ltd.

Journal of The Chinese Institute of Chemical Engineers, Elsevier Science, Ltd.

Journal of Fluid Mechanics, Cambridge University Press, United Kingdom.

Journal of Mathematical and Computer Modelling, Elsevier Science, Ltd.

Applications and Applied Mathematics (AAM): An International Journal, The Department of Mathematics at Prairie View A&M University, USA, and the Technical University of Sofia, Bulgaria.

Mathematical Reviews (MR), American Mathematical Society (AMS).

International Journal of Heat and Mass Transfer (IJHMT), Elsevier Science, Ltd.

International Communications in Heat and Mass Transfer (ICHMT), Elsevier Science, Ltd.

International Journal of Modern Mathematics (IJMM), Dixie W Publishing Corporation, USA.

Archives of Mechanics, Central European Association for Computational Mechanics, Institute of Fundamental Technological Research, Polish Academy of Sciences.

Journal of Mechanical Engineering Science, Part C, Proceedings of the Institution of Mechanical Engineers (IMechE), Professional Engineering Publishing.

Physics Letters A (PLA), Elsevier Science, Ltd.

Trends on Applied Sciences Research, Asian Network for Scientific Information (ANSI).

Aerospace Science and Technology (AST), A European Scientific Journal, Elsevier Science, Ltd.

Engineering Applications of Computational Fluid Mechanics, The Hong Kong Polytechnic University, Hong Kong.

International Journal of Mathematics and Mathematical sciences (IJMMS), Hindawi Publishing Corporation.

Asian Journal of Mathematics and Statistics, Asian Network for Scientific Information (ANSI).

Asian Journal of Applied Sciences, Asian Network for Scientific Information (ANSI).

Asian Research Journal of Physics, Asian Network for Scientific Information (ANSI).

International Journal of Computer Sciernce and Technology (IJCST), Serials Publications, India.

Communications in Nonlinear Science and Numerical Simulation (CNSNS), Elsevier Science, Ltd.

International Journal of Computational Methods (IJCM), World Scientific Publishing Co.

Journal of Fluids Engineering, American Society of Mechanical Engineers (ASME).

Journal of Nonlinear Analysis: Modelling and Control, Lithuanian Association of Nonlinear Analysts (LANA).

The International Journal of Zhejiang University SCIENCE (JZUS), Applied Physics & Engineering (JZUS A), Zhejiang University Press, China.

Proceedings of Mathematical Sciences, The Indian Academy of Sciences, Bangalore, India.

The Latin American Applied Research Journal, The Universidad Nacional del Sur (UNS), Bah?a Blanca, Argentina & National Council of Scientific Research of Argentina.

Journal of Computer and Mathematics with Applications (CAM), Elsevier Science, Ltd.

International Communications in Numerical Methods in Engineering, John Wiley & Sons, Ltd.

Physica A, Statistical Mechanics and Its Applications, Elsevier Science, Ltd.

Finite Elements in Analysis and Design, Elsevier Science, Ltd.

Theoretical and Computational Fluid Dynamics, Springer-Verlag.

Computational Materials Science, Elsevier Science, Ltd.

Applied Thermal Engineering, Elsevier Science, Ltd.

Journal of Heat and Mass Transfer, Warme-und Stoffubertragung, Springer-Verlag.

Acta Mechanica, Springer-Verlag.

Applied Mathematical Modelling, Elsevier Science, Ltd.

ASME Journal of Heat Transfer, American Society of Mechanical Engineers (ASME).

Journal of Acta Applicandae Mathematicae, Springer-Verlag.

Journal of Colloid and Interface Science, Elsevier Science, Ltd.

Journal of Porous Media, Begell House, inc. publishers.

International Journal of Numerical Methods for Heat & Fluid Flow, Emerald Group Publishing Limited, United Kingdom.

International Journal for Numerical Methods in Engineering, John Wiley & Sons, Ltd.

Indian Journal of Mathematics (IJM), The Allahabad Mathematical Society ams India.

Bulletin of the Allahabad Mathematical Society (BAMS), The Allahabad Mathematical Society ams India.

International Journal of Thermal Sciences, Elsevier Science, Ltd.

Central European Journal of Physics (CEJP), Central European Research Journals.

Chemical Engineering Communications (CEC), Taylor & Francis Group, Inc.

Journal of Mechanism and Machine Theory, The International Federation for the Theory of Machines and Mechanisms (IFToMM).

Transactions of the Canadian Society for Mechanical Engineering (CSME).

Mechanics Research Communications, Elsevier Science, Ltd.

AMSE Journals, The International Association for the Advancement of Modelling & Simulation Techniques in Enterprices.

Reviewer for the International Conferences

XVII International Materials Research Congress (IMRC), Sociedad Mexicana de Materiales A.C., Augest 17-21, 2008, Cancun Quintana Roo, Mexico.

The 6th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2008), 30 June to 2 July 2008, University of Pretoria, Pretoria, South Africa.

2005 International Mechanical Engineering Congress and Exposition (IMECE 2005), American Society of Mechanical Engineers (ASME), November 5-11, 2005, Orlando, Florida, USA.

2004 International Mechanical Engineering Congress and Exposition (IMECE 2004), American Society of Mechanical Engineers (ASME), November 2004, Anaheim, California, USA.

28th Design Automation Conference, 2002 ASME Design Engineering Technical Conferences & Computers and Information in Engineering Conference (DETC2002), American Society of Mechanical Engineers (ASME), Septemper 2002, Montreal, Quebec, Canada.

27th Biennial Mechanisms and Robotics Conference, 2002 ASME Design Engineering Technical Conferences & Computers and Information in Engineering Conference (DETC2002), American Society of Mechanical Engineers (ASME), Septemper 2002, Montreal, Quebec, Canada.

The Third International Congress of Fluid Mechanics (ICFM3), Virginia Polytechnic Institute and State University, Faculty of Engineering, Cairo University, and Faculty of Engineering, Mansoura University, Cairo, Egypt, Jan. 1990.

The Fourth Conference on Theoretical and Applied Mechanics, Egyptian Committee of Theoretical and Applied Mechanics, Cairo, Egypt, Nov. 1991.

NATO Conference on Computer-Aided Analysis of Rigid and Flexible Mechanical Systems, Portugal, Mar. 1994.

The Second International Conference on Engineering Mathematics and Physics (ICEMP-94), Faculty of Engineering, Cairo University, Cairo, Egypt, Dec. 1994.

The First International Conference on Advanced Mechanical Engineering Technology for Industrial Production (MEATIP I), Faculty of Engineering, Asuit University, Egypt, Dec. 1994.

Mansoura Engineering First International Conference, Faculty of Engineering, Mansoura University, Mansoura, Egypt, Mar. 1995.

The Fifth Conference on Theoretical and Applied Mechanics, Egyptian Committee of Theoretical and Applied Mechanics, Cairo, Egypt, Mar. 1995.

The Sixth Cairo University International Mechanical Design and Production (MDP) Conference, Faculty of Engineering, Cairo University, Cairo, Egypt, Jan. 1996.

The 1996 Engineering Systems Design and Analysis Conference (ESDA), Presented at The Third Biennial European Joint Conference on Engineering Systems Design and Analysis Conference, The Petroleum Division, The American Society of Mechanical Engineers (ASME), Montpellier, France, July 1996.

The 1997 ASME Design Engineering Technical Conferences, 23th Design Automation Conference, American Society of Mechanical Engineers, Sacramento, California, USA, Sept. 1997.

The 2000 ASME Design Engineering Technical Conferences & Computers and Information in Engineering Conference, 26th Design Automation Conference, American Society of Mechanical Engineers, Baltimore, Maryland, USA, Sept. 2000.

The 18th Canadian Congress of Applied Mechanics (CANCAM 2001), Faculty of Engineering and Applied Science, Memorial University of Newfoundland, June 2001.

The Eighth IFToMM International Symposium on Theory of Machines and Mechanisms, Interntional Federation for the Theory of Machines and Mechanisms, ARoTMM Bucharest, Romania, Aug. 2001.

The 2001 ASME Design Engineering Technical Conferences & Computers and Information in Engineering Conference, 27th Design Automation Conference, American Society of Mechanical Engineers, Pittsburgh, Pennsylvania, USA, Sept. 2001.

International Conference on Modelling & Simulation in Technical and Social Sciences (MS’2002-Spain), International Association for the Advancement of Modelling & Simulation Techniques in Enterprices (AMSE) & University of Girona, Girona, Spain, June 2002.

The 2002 ASME Design Engineering Technical Conferences & Computers and Information in Engineering Conference, 28th Design Automation Conference, American Society of Mechanical Engineers, Montreal, Canada, Sept. 2002.

The 2002 ASME Design Engineering Technical Conferences & Computers and Information in Engineering Conference, 27th Biennial Mechanisms and Robotics Conference, American Society of Mechanical Engineers, Montreal, Canada, Sept. 2002.

The Mediterranean Conference on Modelling and Simulation (MCMS’03), International Association for the Advancement of Modelling & Simulation Techniques in Enterprices (AMSE) & University Mediterranea of Reggio Calabria, Reggio Calabria, Italy, June 2003.

The 4th ASME/JSME Joint Fluids Engineering Conference (FEDSM’03), American Society of Mechanical Engineers & Japaneese Society of Mechanical Engineers, Honolulu, Hawaii, USA, July 2003.

ASME International Mechanical Engineering Conference and Exposition (IMECE 2005), Fluids Engineering Division, Rheology and Fluid Mechanics of Non Linear Materials, American Society of Mechanical Engineers, Orlando, Florida, Nov. 2005.

ASME International Mechanical Engineering Conference and Exposition (IMECE 2006), Fluids Engineering Division, Rheology and Fluid Mechanics of Non Linear Materials, American Society of Mechanical Engineers, Chicago, Illinois, Nov. 2006.

ASME Tenth International Congress of Fluid Dynamics (ICFD10), Ain Soukhna, Egypt, Dec. 2010.

Undergraduate Courses

Mathematics (Differential and Integral Calculus, Multivariable Calculus, Vector Analysis, Analytic Geometry, College Algebra, Ordinary Differential Equations, Partial Differential Equations, Fourier Analysis, Integral Transforms, Complex Analysis, Special Functions, Linear Algebra, Numerical Analysis, Mathematical Methods, Linear Programming, Optomization, Probability and Statistics, Graduation Project).

Classical and Analytical Mechanics (Statics and Dynamics of Particles and Rigid Bodies in Different Dimensions).

Physics (Thermodynamics, Electromagnetics, and Optics).

Fundamentals of Computer Sciences and Computer programming.

Fundamentals of Electrical Engineering.

Practicum (separate, continuous and microteaching).

Graduate Courses

Mathematical Physics.

Advanced Mathematics.

Selected Topics in Mathematics I.

Non-Newtonian Fluids.

Selected Topics in Mathematics II.

Modelling and Simulation of Industrial Systems.

Modelling and Analysis of Industrial Systems.

Ph.D. Dessertation submitted for Partial Fullfulment for the Degree of Doctor of Philosophy in Engineering Mathematics, Department of Engineering Mathematics and Physics, Faculty of Engineering, Fayoum University, Egypt.

Mathematics (1): Differential Calculus

Mathematics (2): Integral Calculus

Mathematics (3): Higher Calculus

Mathematics (4): Ordinary Differential Equations

Mathematics (5): Complex Analysis

Mathematics (6): Partial Diffferential Equations

Mathematics (7): Algebra and Analytic Geometry

Mathematics (8): Linear Algebra

Mathematics (9): Numerical Analysis

Mathematics (10): Introduction to Probability and Statistics

Mechanics (1): Statics

Mechanics (2): Dynamics of Particles

Mechanics (3): Dynamics of Rigid Bodies in Plane Motion.

A general purpose computer program for the kinematic analysis of planar mechanisms in point coordinates.

A computer program for the kinematic analysis of spatial mechanisms in point coordinates.

A general purpose computer program for the dynamic analysis of planar and/or spatial mechanisms in absolute coordinates.

A computer program for the dynamic analysis of planar and/or spatial mechanisms in point-joint coordinates.

Computer programs for the study of several problems in fluid mechanics and heat transfer using finite differences.

A general purpose computer program for the load flow calculations of a 11kv electric power system.

A general purpose computer program for the erection calculations for the towers of a 66kv electric power transmition line.

Leading Scientists and Engineers of OIC Member States, Organization of Islamic Conference (OIC), Islamabad-44000, Pakistan.

Who's Who in the World, 25th Silver Anniversary Edition, 2008, Marquis Who's Who.

Who's Who in the World, 24th Edition, 2007, Marquis Who's Who.

Who's Who in Science and Engineering, 10th Anniversary Edition, 2008-2009, Marquis Who's Who.

Who's Who in Science and Engineering, 9th Edition, 2006-2007, Marquis Who's Who.

International Conference on Models and Methods in Fluid Mechanics, COMSATS Institute of Information Technology (CIIT), Islamabad, Pakistan, 16-18 July, 2006.

The Second International Conference of Applied Mathematics, The Technical University, Plovdiv, Bulgaria, 12-17 August, 2005.

International Conference on Mathematical Models and Methods in Fluid Mechanics, COMSATS Institute of Information Technology (CIIT), Islamabad, Pakistan, 4-6 July, 2005.

Center of Scientific and Applied Research (CFSAAR), College of Science, King Saud University (Al-Qasseem Branch), Kingdom of Saudi Arabia.

Centre of Publishing and Translation, General Administration of Studies and Informations, Ministry of Higher Education, Kingdom of Saudi Arabia.

Department of Mathematics, College of Science, Al-Qasseem University, Kingdom of Saudi Arabia.

Organizing a Workshop in Preparing the Electronic Examinations, Centre of the Development of Student's Assessment Systems, El-Fayoum University, 2010.

Attendance a Practical training in the Electronic Grading, Centre of the Development of Student's Assessment Systems, El-Fayoum University, 2010.

Attendance a Workshop in University Management, El-Fayoum University, 2010.

Attendance a Workshop in Development of Student's Assesement systems, El-Fayoum University, 2010.

Attendance a Workshop in Skills of Scientific Research, Skills Development Unit, Academic Development Administration, Al-Qasseem University, Kingdom of Saudi Arabia, 2007.

Attendance a Practical training in the Audio-Visual Department, University of Arizona, Tucson, USA, 1992.

Attendance Several courses in the German Langauge, Society Service Center, Cairo University, Egypt, 1990.

Attendance a Workshop in preparing the university teacher, Educational Studies Institute, Cairo University, Egypt, 1989.

Attendance a Practical training in the Design Office of the Ministry of Electricity and Energy, Cairo, Egypt, 1986.

Attendance a Practical training in the Iron and Steel Factory, Helwan, Egypy, 1983.

Several courses in Computer, Statistical Studies Institute, Cairo University, Egypt, 1982.

Peace Fellowship for graduate students and researchers, USA Government, (1991-1993).

The Graduate College Scholarship for outstanding graduate students, University of Arizona, Tucson, USA, 1992.

Cairo University graduate with honor degree award, (1985-1993).

Teaching and Research Assistantship, Cairo University, (1985-1991).

Annual outstanding students award, Cairo University, Egypt, (1980-1985).

American Chemical Society (ACS), Columbus, OH, USA.

Egyptian Engineers Society, Cairo, Egypt.

Language Experience: Arabic, English, and German.

Programming Languages: FORTRAN, BASIC, PASCAL.

Operating Systems: Windows, DOS, UNIX, ICL VME and GEORGE 3, and VAX.

Hobbies: reading, writing and directing of short plays, traveling, swimming, and cooking.

References: available upon request.

Chairman of the Committee of Affairs of staff members, Faculty of Engineering, El-Fayoum University, Egypt, 2010-present.

Chairman of the Committee of the Electronic Examinations, Faculty of Engineering, El-Fayoum University, Egypt, 2010-present.

Advisor of the Cultural and Information Committee, Faculty of Engineering, El-Fayoum University, Egypt, 2010-present.

Coordinator of the Committee of the Electronic Courses, Department of Engineering Mathematics and Physics, Faculty of Engineering, El-Fayoum University, Egypt, 2010-present.

Coordinator of the Development of Student's Assessment Systems Project, Faculty of Engineering, El-Fayoum University, Egypt, 2010-present.

Supervisor of the Employee Electronic Singing Project, Faculty of Enineering, El-Fayoum University, Egypt, 2010-present.

Member of the Committee of the Chairmans of the Departments, Faculty of Engineering, El-Fayoum University, Egypt, 2010-present.

Member of the Committee of Community Service and Environmental Development, Faculty of Engineering, El-Fayoum University, Egypt, 2010-present.

Member of the Committee of Students and Examinations, Faculty of Engineering, El-Fayoum University, Egypt, 2010-present.

Member of the Committee of the Postgraduate Studies, Faculty of Engineering, El-Fayoum University, Egypt, 2010-present.

Member of the Committee of Libraries, Faculty of Engineering, El-Fayoum University, Egypt, 2010-present.

Member of the Excutive Team for Development of Student's Assessment Systems Project, Faculty of Engineering, El-Fayoum University, Egypt, 2010-present.

Member of the Management Team for Development of Student's Assessment Systems Project, Faculty of Engineering, El-Fayoum University, Egypt, 2010-present.

Coordinator of the Committee of Laboratories, Department Department of Engineering Mathematics and Physics, Faculty of Engineering, El-Fayoum University, Egypt, 2010-present.

Member of the Council of the Faculty of Engineering, El-Fayoum University, Egypt, 2009-present.

Member of the Committee of the Postgraduate Examinations, Faculty of Engineering, El-Fayoum University, Egypt, 2008-present.

Member of the Committee of the Examinations, Faculty of Engineering, El-Fayoum University, Egypt, 2007-present.

Member of the Committee of Reviewing the M.sc. and Ph.D. theses, Department of Engineering Mathematics and Physics, Faculty of Engineering, El-Fayoum University, Egypt, 2008-present.

Member of the Council of the Department of Mathematics, College of Science, Al-Qasseem University, Kingdom of Saudi Arabia, 2004-2007.

Member of the organizing Committee of The National Conference for Environment. Protection and Pollution, College of Science, Al-Qasseem University, Kingdom of Saudi Arabia, March 2007.

The student advisor, Department of Mathematics, College of Science, Al-Qasseem University, Kingdom of Saudi Arabia, 2006-2007.

Member of the Committee of Studying and Development of the Academic Performance, College of Science, Al-Qasseem University, Kingdom of Saudi Arabia, 2007.

Coordinator of the file of the Courses Transfer, Department of Mathematics, College of Science, Al-Qasseem University, Kingdom of Saudi Arabia, 2006-2007.

Coordinator of the Subject Courses and Subject Schedule of the Summer Term, Department of Mathematics, College of Science, Al-Qasseem University, Kingdom of Saudi Arabia, 2006-2007.

Coordinator of the File of the Course Text Books, Department of Mathematics, College of Science, Al-Qasseem University, Kingdom of Saudi Arabia, 2006-2007.

Preparing the Academic Curriculum, Department of Mathematics, College of Science, Al-Qasseem University, Kingdom of Saudi Arabia, 2005.

Member of the Committee of Modifying Academic Curriculum, Department of Mathematics, College of Science, Al-Qasseem University, Kingdom of Saudi Arabia, 2005-2007.

Coordinator of the File of the Graduated students, Department of Mathematics, College of Science, Al-Qasseem University, Kingdom of Saudi Arabia, 2006-2007.

Coordinator of the Schedule of the Final Examinations, College of Science, Al-Qasseem University, Kingdom of Saudi Arabia, 2005-2007.

Member of the Subject Courses and Subject Schedule Committee, Department of Mathematics, College of Science, Al-Qasseem University, Kingdom of Saudi Arabia, 2005-2006.

Coordinator of the program of Mathematical Workshops, College of Science and College of Society Service, Al-Qasseem University, Kingdom of Saudi Arabia, 2005-2007.

Member of the Courses Transfer Committee, Department of Mathematics, College of Science, Al-Qasseem University, Kingdom of Saudi Arabia, 2004-2006.

Member of the Committee of the Examinations, Department of Mathematics, College of Science, Al-Qasseem University, Kingdom of Saudi Arabia, 2004-2007.

Coordinator of the Summer Term, Department of Mathematics, College of Science, Al-Qasseem University, Kingdom of Saudi Arabia, 2004-2007.

Coordinator of the Graduation Project, Department of Mathematics, College of Science, Al-Qasseem University, Kingdom of Saudi Arabia, 2004-2006.

Coordinator of the Subject Courses and Subject Schedule Committee, Department of Mathematics, College of Science, Al-Qasseem University, Kingdom of Saudi Arabia, 2004-2005.

Preparing the Program of the Master Degree of Science, Department of Mathematics, College of Science, Al-Qasseem University, Kingdom of Saudi Arabia, 2004-2005.

Member of the Graduate Studies Committee, Department of Mathematics, College of Science, Al-Qasseem University, Kingdom of Saudi Arabia, 2004-2005.

Member of the Subject Schedule Committee, College of Science, King Saud University (Al-Qasseem Branch), Kingdom of Saudi Arabia, 2003-2004.

Coordinator of the Subject Courses and Subject Schedule Committee, Department of Mathematics, College of Science, King Saud University (Al-Qasseem Branch), Kingdom of Saudi Arabia, 2003-2004.

Member of the Committee of Studying and Development of the Academic Performance, College of Science, King Saud University (Al-Qasseem Branch), Kingdom of Saudi Arabia, 2002-2004.

Member of the Committee of Organization of the Staff Subject Courses, Department of Mathematics, College of Science, King Saud University (Al-Qasseem Branch), Kingdom of Saudi Arabia, 2003-2004.

Preparation of the Prospectus of the Department of Mathematics, College of Science, King Saud University (Al-Qasseem Branch), Kingdom of Saudi Arabia, 2004.

Member of the Research Proposals Reviewing Committee, Department of Mathematics, College of Science, King Saud University (Al-Qasseem Branch), Kingdom of Saudi Arabia, 2001-2002.

Member of the Graduate Studies Committee, Department of Mathematics, College of Science, King Saud University (Al-Qasseem Branch), Kingdom of Saudi Arabia, 2001-2004.

Coordinator of the Summer term, Department of Mathematics, College of Science, King Saud University (Al-Qasseem Branch), Kingdom of Saudi Arabia, 2001-2004.

Coordinator of the Graduation Project, Department of Mathematics, College of Science, King Saud University (Al-Qasseem Branch), Kingdom of Saudi Arabia, 2000-2004.

Member of the Books Reviewing Committee, Department of Mathematics, College of Science, King Saud University (Al-Qasseem Branch), Kingdom of Saudi Arabia, 2001-2002.

Member of the Courses Transfer Committee, Department of Mathematics, College of Science, King Saud University (Al-Qasseem Branch), Kingdom of Saudi Arabia, 2001-2004.

Member of the Council of the Department of Mathematics, College of Science, King Saud University (Al-Qasseem Branch), Kingdom of Saudi Arabia, 1999-2004.

The Secretary of the Board, Department of Mathematics, College of Science, King Saud University (Al-Qasseem Branch), Kingdom of Saudi Arabia, 2000-2003.

The Coordinator of the Subject Schedule and the Staff Subject Courses, Department of Mathematics, College of Science, King Saud University (Al-Qasseem Branch), Kingdom of Saudi Arabia, 2000-2003.

Member of the Teaching Assistants Interview Committee, College of Science, King Saud University (Al-Qasseem Branch), Kingdom of Saudi Arabia, 2001-2003.

Supervisor of the Social Activities, Department of Mathematics, College of Science, King Saud University (Al-Qasseem Branch), Kingdom of Saudi Arabia, 2002.

Member of the Libraries Committee, College of Science, King Saud University (Al-Qasseem Branch), Kingdom of Saudi Arabia, 2001-2002.

Member of the Council of the Department of Mathematics and Computer, College of Science, College of Education for Women, Ibri, Sultanate of Oman, 1996-1999.

Advisor of the Students, Department of Mathematics and Computer, College of Education for Women, Ibri, Sultanate of Oman, 1996-1999.

Supervisor of the Students Activities, Department of Mathematics and Computer, College of Education for Women, Ibri, Sultanate of Oman, 1997-1999.

Supervisor of the Trips Committee, College of Education for Women, Ibri, Sultanate of Oman, 1998-1999.

Member of the Books Committee, Admistration of the Higher Colleges and Institutes, Sultanate of Oman, 1998.

Preparing the Study Concerning the Installation of the Experimental Engineering Mechanics Laboratory, Faculty of Engineering, Cairo University (El-Fayoum Branch), Egypt, 1993.

Director of the Computer Laboratory, Faculty of Engineering, Cairo University (El-Fayoum Branch), Egypt, 1993-1994.

Director of the Mechanics Laboratory, Faculty of Engineering, Cairo University (El-Fayoum Branch), Egypt, 1994-1996.

Member of the Council of the Department of Engineering Mathematics and Physics, College of Science, Faculty of Engineering, Cairo University (El-Fayoum Branch), Egypt, 1993-1996.

Member of the Courses Transfer Committee for the Preparatory Year of the Faculties of Engineering, The Supreme Council of Universities, Minsitry of Higher Education, Egypt, 1994.

Member of the Teaching Assistants Interview Committee, Faculty of Engineering, Cairo University (El-Fayoum Branch), Egypt, 1994.

Attia, H.A., “Limiting behaviour of the magnetohydrodynamic flow due to a rotating disk of infinite or finite extent”, M.Sc. Thesis, Department of Engineering Mathematics and Physics, Faculty of Engineering, Cairo University, Egypt, 1988.

El-Mistikawy, T.M.A. and Attia, H.A., "The rotating disk flow in the presence of strong magnetic field", Proceedings of the Third International Congress of Fluid Mechanics (ICFM3), Virginia Polytechnic Institute and State University, Faculty of Engineering, Cairo University, and Faculty of Engineering, Mansoura University, Cairo, Egypt, Vol. III, pp. 1211-1222, Jan. 2-4, 1990.

El-Mistikawy, T.M.A., Attia, H.A., and Megahed, A.A., "The rotating disk flow in the presence of weak magnetic field", Proceedings of the Fourth Conference on Theoretical and Applied Mechanics, Egyptian Committee of Theoretical and Applied Mechanics, Cairo, Egypt, pp. 69-82, Nov. 5-7, 1991.

Attia, H.A., “A multi-rigid-body formulation based on particle dynamics and velocity transformation”, Research Report, Department of Aerospace and Mechanical Engineering, The University of Arizona, Tucson, Arizona, USA, 1992.

Attia, H.A., “A computer-oriented dynamical formulation with applications to multi-body systems”, Ph.D. Thesis, Department of Engineering Mathematics and Physics, Faculty of Engineering, Cairo University, Egypt, 1993.

Nikravesh, P.E. and Attia, H.A., "Construction of the equations of motion for multibody dynamics using point and joint coordinates", in: M.F.O.S. Pereira and J.A.C. Ambrosio (eds.), Computer-Aided Analysis of Rigid and Flexible Mechanical Systems, Kluwer Academic Publishers, NATO ASI, Series E: Applied Sciences, Vol. 268, pp. 31-60, 1994.

Maher, G.M. and Attia, H.A., “Dynamic modelling of the three-degrees of freedom planar platform-type manipulator”, Proceedings of the First International Conference on Mechanical Engineering Advanced Technology for Industrial Production MEATIPI, Section 5: Control Systems and Machine, Faculty of Engineering, Assuit University, Assuit, Egypt, pp. 595-606, Dec. 27-29, 1994..

Attia, H.A., "KAC, A computer-aided analysis program for the kinematic analysis of generalized planar linkages", Proceedings of the Second International Conference on Engineering Mathematics and Physics (ICEMP-94), Faculty of Engineering, Cairo University, Cairo, Egypt, Vol. 4, pp. 17-30, Dec. 27-29, 1994.

El-Mistikawy, T.M.A., Attia, H.A., and Megahed, A.A., "A numerical method for the dynamic analysis of planar mechanisms", Proceedings of the Second International Conference on Engineering Mathematics and Physics (ICEMP-94), Faculty of Engineering, Cairo University, Cairo, Egypt, Vol. 4, pp. 31-44, Dec. 27-29, 1994.

Attia, H.A., "Effect of an external uniform magnetic field on the unsteady von Karman rotating disk problem", Proceedings of the Mathematical and Physical Society of Egypt, The National Centre for Information and Decumentation (NIDOC), Academy of Scientific Research and Technology, Egypt, No. 70, pp. 83-93, 1995.

Attia, H.A., Megahed, A.A., and El-Mistikawy, T.M.A., “Dynamic analysis of common planar mechanisms using point and joint coordinates”, Proceedings of the Mansoura Engineering First Conference, Faculty of Engineering, Mansoura University, Mansoura, Egypt, pp. 182-193, March 28-30, 1995

Megahed, A.A., El-Mistikawy, T.M.A., and Attia, H.A., “Computer modelling of a vehicle dynamics”, Proceedings of the Mansoura Engineering First Conference, Faculty of Engineering, Mansoura University, Mansoura, Egypt, March 28-30, 1995.

Mohamed, M.G. and Attia, H.A., "Numerical kinematic analysis of the Motor-Vehicle Multi-link suspension system", Proceedings of the 1995 ASME Design Engineering Technical Conferences, 21th ASME Design Automation Conference, American Society of Mechanical Engineers, Boston, MA, USA, DE-Vol. 82(1), pp. 883-889, Sept. 17-21, 1995.

Attia, H.A. and Mohamed, M.G., “Kinematic analysis of the MacPherson strut motor-vehicle suspension system”, Current Advances in Mechanical Design & Production, Sixth Cairo University International MDP Conference, Faculty of Engineering, Cairo University, Cairo, Jan. 2-4, 1996.

Attia, H.A., "Dynamic analysis of a vehicle with semi-trailing A-arms suspensions", Transactions of the Canadian Society for Mechanical Engineering, Vol. 20, No. 2, pp. 175-186, 1996.

Attia, H.A., "An efficient algorithm for the kinematic analysis of spatial mechanisms", Proceedings of the 1996 Engineering Systems Design and Analysis Conference (ESDA), Vol. 6, Computational Mechanics & Thermomechanics, Presented at The Third Biennial European Joint Conference on Engineering Systems Design and Analysis Conference, The Petroleum Division, The American Society of Mechanical Engineers (ASME), PD-Vol. 78, Montpellier, France, July 1-4, 1996.

Attia, H.A., "Dynamic Modelling of common suspension systems using point and joint coordinates", Proceedings of the 1996 Engineering Systems Design and Analysis Conference (ESDA), Vol. 6, Computational Mechanics & Thermomechanics, Presented at The Third Biennial European Joint Conference on Engineering Systems Design and Analysis Conference, The Petroleum Division, The American Society of Mechanical Engineers (ASME), PD-Vol. 78, Montpellier, France, pp. 43-59, July 1-4, 1996.

Attia, H.A. and Kotb, N.A., "MHD flow between two parallel plates with heat transfer", Acta Mechanica, Springer-Verlag, Vol. 117, pp. 215-220, 1996.

Attia, H.A., "Dynamic analysis of the multi-link five-point suspension system using point and joint coordinates", Acta Mechanica, Springer-Verlag, Vol. 119, pp. 221-228, 1996.

Attia, H.A. and Mohamed, M.G., "Dynamic modelling of a three degrees-of-freedom planar platform-type manipulator", Proceedings of the 1997 ASME Design Engineering Technical Conferences, 23th ASME Design Automation Conference, American Society of Mechanical Engineers, Sacramento, California, USA, pp. 1-11, Sept. 14-17, 1997.

Aboul-Hassan, A.L. and Attia, H.A., "Flow due to a rotating disk with Hall effect", Physics Letters A, Elsevier Science Ltd., Vol. 228, pp. 286-290, 1997.

Attia, H.A., "Formulation of the equations of motion for the RRRR robot manipulator", Transactions of the Canadian Society for Mechanical Engineering, Vol. 22, No. 1, pp. 83-93, 1998.

Attia, H.A., "Computer simulation of a vehicle dynamics", Transactions of the Canadian Society for Mechanical Engineering, Vol. 22, No. 2, pp. 127-142, 1998.

Kotb, N.A. and Attia, H.A., “The effect of variable viscosity on the transient MHD flow and heat transfer between parallel plates”1, Bulletin of the Faculty of Engineering, Assuit University, Vol. 26, Part 2, pp. 141-147, 1998.

Ahmed, M.E.S. and Attia, H.A., "Magnetohydrodynamic flow and heat transfer of a non-Newtonian fluid in an eccentric annulus", Canadian Journal of Physics, National Research Council of Canada, NRC Research Press, Vol. 76, No. 5, pp. 391-401, 1998.

El-Mistikawy, T.M.A., Attia, H.A. and Megahed, A.A., "Asymptotic solution for the flow due to an infinite rotating disk in the case of small magnetic field", Mechanics Research Communications, Elsevier Science, Vol. 25, No. 3, pp. 271-278, 1998.

Attia, H.A., "Unsteady MHD flow near a rotating porous disk with uniform suction or injection", Fluid Dynamics Research, The Japan Society of Fluid Mechanics & Elsevier Science, Vol. 23, No. 5, pp. 283-290, 1998.

Attia, H.A., "Hall current effects on the velocity and temperature fields of an unsteady Hartmann flow", Canadian Journal of Physics, National Research Council of Canada, NRC Research Press, Vol. 76, No. 9, pp. 739-746, 1998.

Attia, H.A., "A numerical method for the kinematic analysis of spatial mechanisms", Transactions of the Canadian Society for Mechanical Engineering, Vol. 23, No. 1A, pp. 71-82, 1999.

Attia, H.A., "Transient MHD flow and heat transfer between two parallel plates with temperature dependent viscosity", Mechanics Research Communications, Elsevier Science Ltd., Vol. 26, No. 1, pp. 115-121, 1999.

Attia, H.A., “A review on multi-rigid-body dynamics”, Research Report, Associate Professors’ Promotion Committee, Ministry of Higher Education, Egypt, 1999.

Attia, H.A., "Numerical kinematic analysis of the double wishbone motor-vehicle suspension system", Transactions of the Canadian Society for Mechanical Engineering, Vol. 24, No. 2, pp. 391-399, 2000.

Attia, H.A. and Mohamed, M.G., "Kinematic analysis of the Macpherson strut motor-vehicle suspension system", Proceedings of the 2000 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, 26th ASME Design Automation Conference, Baltimore, Maryland, USA, pp. 1-12, Sept. 10-13, 2000.

Attia, H.A., El-Mistikawy, T.M.A. and Megahed, A.A., ["Formulation of the equations of motion of RRPR robot manipulator", Proceedings of the 2000 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, 26th ASME Design Automation Conference, American Society of Mechanical Engineers, Baltimore, Maryland, USA, pp. 1-11, Sept. 10-13, 2000.

Attia, H.A., “Hiemenz magnetic flow of a non-Newtonian fluid of second grade with heat transfer”, Canadian Journal of Physics, National Research Council of Canada, NRC Research Press, Vol. 78, No. 9, pp. 875-882, 2000.

Ahmed, M.E.S. and Attia, H.A., “MHD flow and heat transfer in a rectangular duct with temperature dependent viscosity and Hall effect”, International Communications in Heat and Mass Transfer, Elsevier Science Ltd., Vol. 27, No.8, pp. 1177-1187, 2000.

El-Mistikawy, T.M.A., Attia, H.A. and Megahed, A.A., "Asymptotic solution for the flow due to a rotating disk in the case of large magnetic field", Transactions of the Canadian Society for Mechanical Engineering, Vol. 24, No. 3 & 4, pp. 515-524, 2000.

Attia, H.A., “Transient flow of a conducting fluid with heat transfer due to an infinite rotating disk”, International Communications in Heat and Mass Transfer, Elsevier Science Ltd., Vol. 28, No. 3, pp. 439-448, 2001.

Attia, H.A. and Ahmed, M.E.S., “A transient analysis of the velocity and temperature fields of a power-law Hartmann fluid flow with the Hall effect”, Scientific Bulletin, Faculty of Engineering, Ain Shames University, Part III: Mechanical Engineering and Physics & Mathematics, Vol. 36, No. 1, pp. 431-448, 2001.

Attia, H.A., "Dynamics of the standard MacPherson motor-vehicle suspension system in point and joint coordinates", Transactions of the Canadian Society for Mechanical Engineering, Vol. 25, No. 1, pp. 63-77, 2001.

Attia, H.A. and Amasha, H.M., “Kinematic analysis of a parallel robot manipulator”, Proceedings of the 18th Canadian Congress of Applied Mechanics CANCAM 2001, Memorial University of Newfoundland, Canada, Vol. 2, pp. 295-296, June 3-7, 2001.

Attia, H.A. and Amasha, H.M., “Kinematic analysis of planar mechanisms: a computer oriented approach”, Proceedings of the 18th Canadian Congress of Applied Mechanics CANCAM 2001, Memorial University of Newfoundland, Canada, Vol. 2, pp. 297-298, June 3-7, 2001.

Attia, H.A., “A simplified recursive formulation for the dynamic analysis of planar mechanisms”, Acta Mechanica, Springer-Verlag, Vol. 149, No. 1-4, pp. 11-21, 2001.

Attia, H.A., “Dynamic modelling of planar linkages using particle dynamics and velocity transformation”, Proceedings of the Eighth IFToMM International Symposium on Theory of Machines and Mechansims (SYROM 2001), Interntional Federation for the Theory of Machines and Mechanisms, ARoTMM Bucharest, Romania, Vol. I, pp. 25-30, Aug. 28- Sept. 1, 2001.

Attia, H.A. and Amasha, H.M., “An efficient algorithm for the kinematic analysis of planar mechanisms”, Proceedings of the Eighth IFToMM International Symposium on Theory of Machines and Mechansims (SYROM 2001), Interntional Federation for the Theory of Machines and Mechanisms, ARoTMM Bucharest, Romania, Vol. I, pp. 31-36, Aug. 28- Sept. 1, 2001.

Attia, H.A., "A computational method for the dynamic analysis of planar linkages with applications", Proceedings of the 2001 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, 27th ASME Design Automation Conference, American Society of Mechanical Engineers, Pittsburgh, Pennsylvania, USA, pp. 1-12, Sept. 9-12, 2001.

Attia, H.A., “Influence of temperature dependent viscosity on the MHD channel flow of dusty fluid with heat transfer”, Acta Mechanica, Springer-Verlag, Vol. 151, No. 1-2, pp. 69-101, 2001.

Attia, H.A., “A recursive method for the dynamic analysis of a system of rigid bodies in plane motion”, Computer Assisted Mechanics and Engineering Sciences (CAMES), Central European Association for Computational Mechanics, Institute of Fundamental Technological Research, Polish Academy of Sciences, Vol. 8, No. 4, pp. 557-566, 2001.

El-Moghazy, I.M.M. and Attia, H.A., "Part-I Heat transfer in the thin layer part for the film condensation on horizontal low finned tubes", Transactions of the Canadian Society for Mechanical Engineering, Vol. 25, No. 3&4, pp. 369-390, 2001.

Attia, H.A. and El-Mistikawy, T.M.A., “A matrix formulation for the dynamic analysis of planar mechanisms using point coordinates and velocity transformation”, European Journal of Mechanics A/Solids, European Mechanics Society & Elsevier Science Ltd., Vol. 20, No. 6, pp. 981-995, 2001.

Attia, H.A. and Aboul-Hassan, A.L., “Effect of Hall current on the unsteady MHD flow due to a rotating disk with uniform suction or injection“,Applied Mathematical Modelling, Simulation and Computation for Engineering and Enviromental Systems, Elsevier Science Ltd., Vol. 25, Issue 12, pp. 1089-1098, 2001.

Attia, H.A. and Ahmed, M.E.S., “A transient Hartmann flow with heat transfer of a non-Newtonian fluid with suction and injection considering the Hall effect”, Journal of Plasma Physics, Cambridge University Press, Vol. 67, Part 1, pp. 27-47, 2002.

Attia, H.A., “Dynamic modelling of the double wishbone motor-vehicle suspension system”, European Journal of Mechanics A/Solids, European Mechanics Society & Elsevier Science Ltd., Vol. 21, No.1, pp. 167-174, 2002.

Aboul-Hassan, A.L. and Attia, H.A., “Hydromagnetic flow of a dusty fluid in a rectangular channel with Hall current and heat transfer”, Canadian Journal of Physics, National Research Council of Canada, NRC Research Press, Vol. 80, No. 5, pp. 579-589, 2002.

Attia, H.A., “On the effectiveness of uniform suction-injection on the unsteady flow due to a rotating disk with heat transfer”, International Communications in Heat and Mass Transfer, Elsevier Science Ltd., Vol. 29, No. 5, pp. 653-661, 2002.

Attia, H.A., “Unsteady MHD flow and heat transfer of dusty fluid between parallel plates with variable physical properties”, Applied Mathematical Modelling, Elsevier Science Ltd., Vol. 26, Issue 9, pp. 863-875, 2002.

Aboul-Hassan, A.L. and Attia, H.A., “Unsteady hydromagnetic flow of a viscoelastic fluid with temperature dependent viscosity”, Canadian Journal of Physics, National Research Council of Canada, NRC Research Press, Vol. 80, No. 9, pp. 1015-1024, 2002.

Attia, H.A., “The structure of a viscous conducting fluid near a rotating disk edge”, Proceedings of the International Conference on Modelling & Simulation in Technical and Social Sciences (MS’2002-Spain), International Association for the Advancement of Modelling & Simulation Techniques in Enterprices (AMSE), Girona, Spain, pp. 1-6, June 25-27, 2002.

Attia, H.A. and Jazmati, M.S., “Kinematics and dynamics of a planar platform-type manipulator”, International Mathematical Journal, Vol. 2, No. 7, pp. 663-669, 2002.

Attia, H.A., “Hall current effect on the unsteady von Karman problem with heat transfer”, International Communications in Heat and Mass Transfer, Elsevier Science Ltd., Vol. 29, No. 7, pp. 983-991, 2002.

Attia, H.A., “Transient MHD flow of a particular class of non-Newtonian fluids near a rotating porous disk with heat transfer”, Physica Scripta, International Journal for Experimental and Theoretical Physics, The Royal Swedish Academy of Sciences & Marston Lindsay Ross International Limited, Vol. 66, No. 6, pp. 458-469, 2002.

Attia, H.A., “Transient Hartmann flow with heat transfer considering the ion slip”, Physica Scripta, International Journal for Experimental and Theoretical Physics, The Royal Swedish Academy of Sciences & Marston Lindsay Ross International Limited, Vol. 66, No. 6, pp. 470-475, 2002.

Attia, H.A., “A simplified recursive formulation for the dynamic analysis of spatial mechanisms in point coordinates”, Journal of Applied Mathematics and Mechanics, ZAMM - Zeitschrift fur Angewandte Mathematik und Mechanik, Wiley-VCH, Vol. 83, No. 5, pp. 351-360, 2003.

Attia, H.A., “Unsteady flow of a non-Newtonian fluid above a rotating disk with heat transfer”, International Journal of Heat and Mass Transfer, Elsevier Science Ltd., Vol. 46, Issue 14, pp. 2695-2700, 2003.

Attia, H.A., “Velocity and temperature fields of a non-Newtonian fluid above a rotating disk with Hall effect”, International Communications in Heat and Mass Transfer, Elsevier Science Ltd., Vol. 30, No. 4, pp. 525-534, 2003.

Attia, H.A., “Unsteady von Karman magnetic flow and heat transfer considering the ion slip”, International Communications in Heat and Mass Transfer, Elsevier Science Ltd., Vol. 30, No. 4, pp. 535-543, 2003.

Attia, H.A. and Jazmati, M.S., “Kinematic analysis of planar mechanical systems in Cartesian coordinates”, International Mathematical Journal, Vol. 3, No. 5, pp. 503-510, 2003.

Jazmati, M.S. and Attia, H.A., “Determination of the singular points on satellites’tracks and the geometrical status of the adjacent tracks”, International Mathematical Journal, Vol. 3, No. 5, pp. 511-514, 2003.

Attia, H.A., “Unsteady von Karman magnetic flow and heat transfer considering the ion slip”, International Communications in Heat and Mass Transfer, Elsevier Science Ltd., Vol. 30, No. 4, pp. 535-543, 2003.

Attia, H.A., “Axisymmetric stagnation point MHD flow over a porous plate with heat transfer”, Proceedings of the 4TH ASME/JSME Joint Fluids Engineering Conference (FEDSM’03), American Society of Mechanical Engineers & Japaneese Society of Mechanical Engineers, Honolulu, Hawaii, USA, pp. 1-5, July 6-11, 2003.

Attia, H.A. and Aboul-Hassan, A.L., “The effect of variable properties on the unsteady Hartmann flow with heat transfer considering the Hall effect”, Applied Mathematical Modelling, Simulation and Computation for Engineering and Enviromental Systems, Elsevier Science Ltd., Vol. 27, Issue 7, pp. 551-563, 2003.

Attia, H.A., “Dynamic analysis of planar mechanisms using particle dynamics”, Proceedings of the Mediterranean Conference on Modelling and Simulation (MCMS’03), International Association for the Advancement of Modelling & Simulation Techniques in Enterprices (AMSE) & University Mediterranea of Reggio Calabria, Reggio Calabria, Italy, pp. 1-6, June 25-27, 2003.

Attia, H.A., “Dynamic analysis of planar linkages: A recursive approach”, Meccanica, International Journal of the Italian Association of Theoretical and Applied Mechanics (AIMETA), Kluwer Academic Publishers, Vol. 48, No. 4, pp. 405-418, 2003.

Attia, H.A., “Unsteady flow of a dusty conducting non-Newtonian fluid through a pipe”, Canadian Journal of Physics, National Research Council of Canada, NRC Research Press, Vol. 81, No. 5, pp. 789-795, 2003.

Attia, H.A., “Steady von Karman flow and heat transfer of a non-Newtonian fluid with uniform suction-injection”, International Communications in Heat and Mass Transfer, Elsevier Science Ltd., Vol. 30, No. 6, pp. 871-879, 2003.

Attia, H.A., “Steady Hartmann flow with temperature dependent viscosity and the ion slip”, International Communications in Heat and Mass Transfer, Elsevier Science Ltd., Vol. 30, No. 6, pp. 881-890, 2003.

Attia, H.A., “Time varying rotating disk flow and heat transfer of a conducting fluid with suction or injection”, International Communications in Heat and Mass Transfer, Elsevier Science Ltd., Vol. 30, No. 7, pp. 1041-1049, 2003.

Attia, H.A., “Time varying rotating disk flow and heat transfer of a conducting fluid with suction or injection”, International Communications in Heat and Mass Transfer, Elsevier Science Ltd., Vol. 30, No. 7, pp. 1041-1049, 2003.

Attia, H.A., “Kinematic analysis of the multi-link five-point suspension system in point coordinates”, KSME International Journal, The Korean Society of Mechanical Engineers, Vol. 17, No. 8, pp. 1133-1139, 2003.

El-Mistikawy, T.M.A. and Attia, H.A., “Magnetohydrodynamic flow near the edge of a rotating disk”, Canadian Journal of Physics, National Research Council of Canada, NRC Research Press, Vol. 81, No. 9, pp. 1141-1149, 2003.

Attia, H.A., “Homann magnetic flow and heat transfer with uniform suction or injection”, Canadian Journal of Physics, National Research Council of Canada, NRC Research Press, Vol. 81, No. 10, pp. 1223-1230, 2003.

Attia, H.A., “Dynamic simulation of a parallel manipulator”, A.M.S.E. Journals, Advances in Modelling & Analysis, Series C: Systems Analysis, Control & Design, Simulation, CAD, International Association for the Advancement of Modelling & Simulation Techniques in Enterprices, Vol. 58, No. 3, pp. 27-41, 2003.

Attia, H.A., “Equations of motion of planar serial chains of rigid bodies”, Journal of Multibody System Dynamics, Kluwer Academic Publishers, Vol. 10, Issue 4, pp. 323-339, 2003.

Attia, H.A., “A matrix formulation for the dynamic analysis of spatial mechanisms using point coordinates and velocity transformation”, Acta Mechanica, Springer-Verlag, Vol. 165, No. 3-4, pp. 207-222, 2003.

Attia, H.A., “Dynamics of the MacPherson strut motor-vehicle suspension system in point and joint coordinates”, KSME International Journal, The Korean Society of Mechanical Engineers, Vol. 17, No. 9, pp. 1287-1296, 2003.

Attia, H.A., “Equations of motion of a planar chain of rigid rods using a recursive algorithm”, A.M.S.E. Journals, Modelling, Measurement & Control, Series B: Solid & fluid mechanics & thermic, mechanical systems, robotics, civil engineering, International Association for the Advancement of Modelling & Simulation Techniques in Enterprices, Vol. 72, No. 2, pp. 53-66, 2003.

Attia, H.A., “On the transient flow and heat transfer of a non-Newtonian fluid due to the uniform rotation of an infinite disk”, A.M.S.E. Journals, Modelling, Measurement & Control, Series B: Solid & fluid mechanics & thermic, mechanical systems, robotics, civil engineering, International Association for the Advancement of Modelling & Simulation Techniques in Enterprices, Vol. 72, No. 3, pp. 1-11, 2003.

Attia, H.A., “Hiemenz magnetic flow and heat transfer with uniform suction or injection”, A.M.S.E. Journals, Modelling, Measurement & Control, Series B: Solid & fluid mechanics & thermic, mechanical systems, robotics, civil engineering, International Association for the Advancement of Modelling & Simulation Techniques in Enterprices, Vol. 72, No. 7, pp. 21-29, 2003.

Attia, H.A., “Numerical kinematic analysis of the standard MacPherson motor-vehicle suspension system”, KSME International Journal, The Korean Society of Mechanical Engineers, Vol. 17, No. 12, pp. 1961-1968, 2003.

Attia, H.A., “Dynamic modelling of planar mechanisms using point coordinates”, KSME International Journal, The Korean Society of Mechanical Engineers, Vol. 17, No. 12, pp. 1977-1985, 2003.

Attia, H.A., “Hydromagnetic stagnation point flow with heat transfer over a permeable surface”, The Arabian Journal for Science and Engineering (AJSE), Series B: Engineering, KFUPM Press, King Fahd University of Petroleum and Minerals, Kingdom of Saudi Arabia, Vol. 28, No. 1B, pp. 107-112, 2003.

Attia, H.A., “The effect of uniform suction and injection on the unsteady flow due to a permeable rotating disk with heat transfer”, Proceedings of the Mathematical and Physical Society of Egypt, The National Centre for Information and Decumentation (NIDOC), Academy of Scientific Research and Technology, Egypt, No. 81, pp. 1-10, 2004.

Attia, H.A., “A recursive method for the dynamic analysis of mechanical systems in spatial motion”, Acta Mechanica, Springer-Verlag, Vol. 167, No. 1-2, pp. 41-55, 2004.

Attia, H.A., “A computer method for the dynamic analysis of a system of rigid bodies in plane motion”, KSME International Journal, The Korean Society of Mechanical Engineers, Vol. 18, No. 2, pp. 193-302, 2004.

Attia, H.A., “Unsteady Hartmann flow of a viscoelastic fluid considering the Hall effect”, Canadian Journal of Physics, National Research Council of Canada, NRC Research Press, Vol. 82, No. 2, pp. 127-139, 2004.

Attia, H.A., “Equations of motion of planar mechanical systems based on particle dynamics and a recursive algorithm”, Proceedings of the Institution of Mechanical Engineers (IMechE) Part K: Journal of Multi-body Dynamics, Professional Engineering Publishing Ltd., Vol. 218, No. 1, pp. 31-38, 2004.

Attia, H.A., “Equations of motion of serial chains in spatial motion using a recursive algorithm”, Computer Assisted Mechanics and Engineering Sciences (CAMES), Central European Association for Computational Mechanics, Polish Academy of Sciences, Vol. 11, No. 1, pp. 35-46, 2004.

Attia, H.A., “A recursive algorithm for generating the equations of motion of spatial mechanical systems with application to the five-point suspension”, KSME International Journal, The Korean Society of Mechanical Engineers, Vol. 18, No. 4, pp. 550-559, 2004.

Attia, H.A., “State-of-the-art of rotating disk flow of a conducting fluid”, Research Report, Professors’ Promotion Committee, Ministry of Higher Education, Egypt, 2004.

Attia, H.A., “A numerical algorithm for kinematic analysis of the Macpherson strut suspension system using point coordinates”, The Journal of KSIAM, Korea Society for Industrial and Applied Mathematics, Vol. 8, No. 1, pp. 67-80, 2004.

Attia, H.A., “Ion slip effect on the flow due to a rotating disk”, The Arabian Journal for Science and Engineering (AJSE), Series A: Science, KFUPM Press, King Fahd University of Petroleum and Minerals, Kingdom of Saudi Arabia, Vol. 29, No. 2A, pp. 165-172, 2004.

Attia, H.A. and Ahmed, M.E.S., “Non-Newtonian conducting fluid flow and heat transfer due to a rotating disk”, The ANZIAM Journal, The Journal of the Australian Mathematical Society: Series B-Applied Mathematics, Vol. 46, Part 2, pp. 237-248, 2004.

Attia, H.A., “On hydromagnetic flow due to a rotating disk”, Applied Mathematical Modelling, Simulation and Computation for Engineering and Enviromental Systems, Elsevier Science Ltd., Vol. 28, Issue 12, pp. 1007-1014, 2004.

Attia, H.A. and Ahmed, M.E.S., “Hall effect on unsteady MHD Couette flow and heat transfer of a Bingham fluid with suction and injection”, Applied Mathematical Modelling, Simulation and Computation for Engineering and Enviromental Systems, Elsevier Science Ltd., Vol. 28, Issue 12, pp. 1027-1045, 2004.

Attia, H.A., “Dynamic analysis of a chain of rigid rods”, The Journal of KSIAM, Korea Society for Industrial and Applied Mathematics, Vol. 8, No. 2, pp. 75-86, 2004.

Attia, H.A., “MHD flow of a dusty fluid between parallel plates”, A.M.S.E. Journals, Modelling, Measurement & Control, Series B: Solid & fluid mechanics & thermic, mechanical systems, robotics, civil engineering, International Association for the Advancement of Modelling & Simulation Techniques in Enterprices, Vol. 73, No. 2, pp. 45-58, 2004.

Attia, H.A., “Hall effect on the flow of a dusty non-Newtonian fluid in a circular pipe”, A.M.S.E. Journals, Modelling, Measurement & Control, Series B: Solid & fluid mechanics & thermic, mechanical systems, robotics, civil engineering, International Association for the Advancement of Modelling & Simulation Techniques in Enterprices, Vol. 73, No. 2, pp. 59-70, 2004.

Attia, H.A., “Analytical solution for unsteady MHD flow of a dusty fluid in a round tube considering the Hall effect”, A.M.S.E. Journals, Modelling, Measurement & Control, Series B: Solid & fluid mechanics & thermic, mechanical systems, robotics, civil engineering, International Association for the Advancement of Modelling & Simulation Techniques in Enterprices, Vol. 73, No. 3, pp. 39-50, 2004.

Attia, H.A., “Kinematic analysis of planar mechanical systems via program KAC”, A.M.S.E. Journals, Modelling, Measurement & Control, Series B: Solid & fluid mechanics & thermic, mechanical systems, robotics, civil engineering, International Association for the Advancement of Modelling & Simulation Techniques in Enterprices, Vol. 73, No. 4, pp. 1-18, 2004

Attia, H.A., “A recursive algorithm for generating the equations of motion of a chain of rigid rods in spatial motion”, A.M.S.E. Journals, Modelling, Measurement & Control, Series B: Solid & fluid mechanics & thermic, mechanical systems, robotics, civil engineering, International Association for the Advancement of Modelling & Simulation Techniques in Enterprices, Vol. 73, No. 4, pp. 31-44, 2004.

Attia, H.A., “Equations of motion of a system of rigid bodies in point coordinates”, A.M.S.E. Journals, Modelling, Measurement & Control, Series B: Solid & fluid mechanics & thermic, mechanical systems, robotics, civil engineering, International Association for the Advancement of Modelling & Simulation Techniques in Enterprices, Vol. 73, No. 6, pp. 21-34, 2004.

. Attia, H.A., “A recursive approach for dynamic analysis of multibody systems with applications to vehicle dynamics”, A.M.S.E. Journals, Modelling, Measurement & Control, Series B: Solid & fluid mechanics & thermic, mechanical systems, robotics, civil engineering, International Association for the Advancement of Modelling & Simulation Techniques in Enterprices, Vol. 73, No. 6, pp. 55-74, 2004

Attia, H.A., “Dynamic analysis of spatial mechanisms: A recursive approach”, Meccanica, International Journal of the Italian Association of Theoretical and Applied Mechanics (AIMETA), Springer-Verlag, Vol. 40, No. 1, pp. 1-18, 2005.

Attia, H.A., “Numerical study of the flow and heat transfer of Reiner-Rivlin fluid on a rotating porous disk”, Journal of Applied Mechanics and Technical Physics, Translated by Kluwer Academic/Plenum Publishers: Compustion, Explosion, and Shock Waves, Vol. 46, No. 1, pp. 68-76, 2005

Attia, H.A., “Point-joint coordinate formulation for the dynamic analysis of generalised planar linkages”, The ANZIAM Journal, The Journal of the Australian Mathematical Society: Series B-Applied Mathematics, Vol. 46, Part 4, pp. 575-589, 2005.

Attia, H.A., “Unsteady Couette flow with heat transfer of a viscoelastic fluid considering the Hall effect”, Kragujevac Journal of Science (KJS), Faculty of Science, University of Kragujevac, Serbia & Montenegro, Vol. 27, pp. 5-21, 2005.

Attia, H.A., “The effect of suction and injection on the unsteady flow of a dusty conducting fluid in rectangular channel”, Journal of Mechanical Science and Technology, Thermal Engineering.Fluid Engineering.Energy and Power Engineering, The Korean Society of Mechanical Engineers, Vol. 19, No. 5, pp. 1148-1157, 2005.

Attia, H.A., “Effect of temperature dependent viscosity and thermal conductivity on the unsteady MHD Couette-Poiseulle flow”, Kragujevac Journal of Science (KJS), Faculty of Science, University of Kragujevac, Serbia & Montenegro, Vol. 27, pp. 23-30, 2005.

Ahmed, M.E.S. and Attia, H.A., “The effect of Hall current on MHD flow and heat transfer of Bingham fluids in a rectangular duct”, Canadian Journal of Physics, National Research Council of Canada, NRC Research Press, Vol. 83, No. 6, pp. 637-651, 2005.

Attia, H.A., “Unsteady MHD Couette flow and heat transfer between parallel porous plates with exponential decaying pressure gradient”, Proceedings of IMECE2005, Fluids Engineering Division, Rheology and Fluid Mechanics of Non Linear Materials, 2005 ASME International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers, Orlando, Florida, pp. 1-5, Nov. 5-11, 2005.

Attia, H.A., “MHD Couette flow with temperature dependent viscosity and the ion slip”, Tamkang Journal of Science and Engineering, Tamkang University Press, Amvo Publishing Company, Tamsui, Taiwan, Vol. 8, No. 1, pp. 11-16, 2005.

Attia, H.A., “The effect of suction and injection on the unsteady flow between two parallel plates with variable properties”, Tamkang Journal of Science and Engineering, Tamkang University Press, Amvo Publishing Company, Tamsui, Taiwan, Vol. 8, No. 1, pp. 17-22, 2005.

Attia, H.A., “Effect of the ion slip on the MHD flow of a dusty fluid with heat transfer under exponential decaying pressure gradient”, Central European Journal of Physics (CEJP), Central European Science Journals, Vol. 3, No. 4, pp. 484-507, 2005.

Attia, H.A., “Two-step generation of the equations of motion of closed-chains using point and joint cootdinates”, Applied Mathematical Modelling, Simulation and Computation for Engineering and Enviromental Systems, Elsevier Science Ltd., Vol. 29, Issue 12, pp. 1182-1195, 2005.

Attia, H.A., “Magnetic flow and heat transfer in a rectangular channel with variable viscosity”, The Arabian Journal for Science and Engineering (AJSE), Series A: Science, KFUPM Press, King Fahd University of Petroleum and Minerals, Kingdom of Saudi Arabia, Vol. 30, No. 2A, pp. 287-298, 2005.

Attia, H.A., “Unsteady Couette-Poiseulle flow with variable physical properties in the presence of a uniform magnetic field”, Mechanics and Mechanical Engineering International Journal (MME), Division of Mechanics, Technical University of Lodz, Lodz, Poland, Vol. 9, No. 2, pp. 5-13, 2005.

Attia, H.A., “Unsteady Couette flow with heat transfer of a viscoelastic fluid considering the ion slip”, Journal of Mechanical Science and Technology, Thermal Engineering.Fluid Engineering.Energy and Power Engineering, The Korean Society of Mechanical Engineers (KSME), Vol. 47, No. 5, pp 809-817, 2005.

Attia, H.A., “Unsteady Couette-Poiseulle flow with temperature dependent physical properties in the presence of a uniform magnetic field”, Malaysian Journal of Science (MJS), Series B, Vol. 24, No. 2, pp. 51-57, 2005.

Attia, H.A., “Dynamic model of multi-rigid-body systems based on particle dynamics with recursive approach”, Journal of Applied Mathematics (JAM), Hindawi Publishing Corporation, Vol. 4, pp. 365-382, 2005.

Attia, H.A., “Unsteady flow of a dusty conducting fluid between parallel porous plates with temperature dependent viscosity”, Turkish Journal of Physics, Department of Scientific Journals, The Scientific and Technical Research Council of Turkey, Vol. 29, Issue 4, 257-267, 2005.

Attia, H.A., “MHD Couette flow with variable physical properties”, A.M.S.E. Journals, Modelling, Measurement & Control, Series B: Solid & fluid mechanics & thermic, mechanical systems, robotics, civil engineering, International Association for the Advancement of Modelling & Simulation Techniques in Enterprices, Vol. 74, No. 2, pp. 25-34, 2005.

Attia, H.A., “Kinematic analysis of the Macpherson strut suspension system in point coordinates”, A.M.S.E. Journals, Modelling, Measurement & Control, Series B: Solid & fluid mechanics & thermic, mechanical systems, robotics, civil engineering, International Association for the Advancement of Modelling & Simulation Techniques in Enterprices, Vol. 74, No. 2, pp. 35-52, 2005.

Attia, H.A., “Ion slip effect on the unsteady flow of a dusty power law fluid through a circular pipe”, A.M.S.E. Journals, Modelling, Measurement & Control, Series B: Solid & fluid mechanics & thermic, mechanical systems, robotics, civil engineering, International Association for the Advancement of Modelling & Simulation Techniques in Enterprices, Vol. 74, No. 4, pp. 51-64, 2005.

Attia, H.A., “Hall effect on unsteady Couette flow with heat transfer under exponential decaying pressure gradient”, Journal of Mechanical Science and Technology, Thermal Engineering.Fluid Engineering.Energy and Power Engineering, The Korean Society of Mechanical Engineers (KSME), Vol. 19, No. 11, pp. 1053-2060, 2005.

Attia, H.A., “Numerical study of flow and heat transfer of a non-Newtonian fluid on a rotating porous disk”, Applied Mathematics and Computation, Elsevier Science Ltd., Vol. 163, Issue 1, pp. 327-342, 2005.

Attia, H.A., “Unsteady Couette flow with heat transfer considering the ion slip”, Turkish Journal of Physics, Department of Scientific Journals, The Scientific and Technical Research Council of Turkey, Vol. 29, Issue 6, pp. 379-388, 2005.

Attia, H.A., “Hall effect on Couette flow with heat transfer of a dusty conducting fluid in the presence of uniform suction and injection”, African Journal Of Mathematical Physics (AJMP), The Moroccan Grouping in High Energy Physics (GNPHE), Vol. 2, No. 1, pp. 97-110, 2005

Attia, H.A., “Steady Couette flow with temperature dependent viscosity and the Hall effect”, The Arab Gulf Journal of Scientific Research, The Arabian Gulf University (AGU), Kingdom of Bahrain, Vol. 23, No. 1, pp. 37-41, 2005.

Attia, H.A. and Ahmed, M.E.S., “Circular pipe MHD flow of a dusty Bingham fluid”, Tamkang Journal of Science and Engineering, Tamkang University Press, Amvo Publishing Company, Taiwan, Vol. 8, No. 4, pp. 257-265, 2005.

Attia, H.A., “Dynamic simulation of constrained mechanical systems using projection recursive algorithm”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Revista Brasileira De Ciencias Mecanicas (RBCM), The Brazilian Society of Mechanical Sciences and Engineering, Vol. XXVIII, No. 1, pp. 45-52, 2006.

Attia, H.A., “Transient hydromagnetic flow of a dusty fluid between parallel plates with ion slip and heat transfer”, Italian Journal of Pure and Applied Mathematics (IJPAM), Forum, Editrice Universitaria Udinese Srl, Via Palladio 8, 33100 Udine, Italy, Vol. 19, pp. 91-114, 2006.

Attia, H.A., “Unsteady MHD flow of a dusty non-Newtonian Bingham fluid through a circular pipe”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Revista Brasileira De Ciencias Mecanicas (RBCM), The Brazilian Society of Mechanical Sciences and Engineering, Vol. XXVII, No. 3, pp. 264-268, 2006.

Attia, H.A., “On the effectiveness of variation in the physical variables on the mhd steady flow between parallel plates with heat transfer”, International Journal for Numerical Methods in Engineering, John Wiley & Sons, Ltd., Vol. 65, Issue 2, pp. 224-235, 2006.

Attia, H.A., “Computational dynamics of three-dimensional closed-chains of rigid bodies”, Applied Mathematics and Computation, Elsevier Science Ltd., Vol. 172, Issue 1, pp. 286-304, 2006.

Attia, H.A., “Steady Couette flow with temperature dependent physical properties”, Archive of Applied Mechanics (Ingenieur Archiv), Springer-Verlag GmbH, Vol. 75, No. 4-5, pp. 268-274, 2006.

Attia, H.A., “Hall effect on the flow of a dusty Bingham fluid in a circular pipe”, Turkish Journal of Engineering and Enviromental Sciences, Department of Scientific Journals, The Scientific and Technical Research Council of Turkey, Vol. 30, Issue 1, pp. 14-21, 2006.

Attia, H.A., “Unsteady Hartmann flow with heat transfer in the presence of uniform suction and injection”, Journal of the Korea Society of Mathematical Education Series B: Pure and Applied Mathematics, Korea Society of Mathematical Education (KSME), Vol. 13, No. 1, pp. 1-10, 2006.

Attia, H.A. and Ahmed, M.E.S., “Hydromagnetic flow and heat transfer of a conducting Casson fluid in a rectangular channel”, Communications in Numerical Methods in Engineering, John Wiley & Sons, Vol. 22, Issue 4, pp. 251-268, 2006.

Attia, H.A., “Hall effect on Couette flow with heat transfer of a dusty conducting fluid between parallel porous plates under exponential decaying pressure gradient”, Journal of Mechanical Science and Technology, Thermal Engineering.Fluid Engineering.Energy and Power Engineering, The Korean Society of Mechanical Engineers (KSME), Vol. 20, No. 4, pp. 569-579, 2006.

Attia, H.A., “Ion slip effect on the unsteady flow of a dusty Casson fluid through a circular pipe”, Kragujevac Journal of Science (KJS), Faculty of Science, University of Kragujevac, Serbia & Montenegro, Vol. 28, pp. 5-15, 2006.

Attia, H.A., “On the effectiveness of porosity on unsteady Couette flow and heat transfer between parallel porous plates with exponential decaying pressure gradient”, Kragujevac Journal of Science (KJS), Faculty of Science, University of Kragujevac, Serbia & Montenegro, Vol. 28, pp. 17-24, 2006.

Attia, H.A., “Time varying Hartmann flow with heat transfer of a power-law fluid with uniform suction and injection under constant pressure gradient”, Kragujevac Journal of Science (KJS), Faculty of Science, University of Kragujevac, Serbia & Montenegro, Vol. 28, pp. 25-38, 2006.

Attia, H.A., “Unsteady hydromagnetic channel flow of dusty fluid with temperature dependent viscosity and thermal conductivity”, Heat and Mass Transfer, Warme-und Stoffubertragung, Springer-Verlag, Vol. 42, No. 9, pp. 779-787, 2006.

Attia, H.A., “Stagnation point flow and heat transfer of a micropolar fluid in a porous medium”, Turkish Journal of Physics, Department of Scientific Journals, The Scientific and Technical Research Council of Turkey, Vol. 30, Issue 1, pp. 57-66, 2006.

Attia, H.A., “Rotating disk flow with heat transfer of a non-Newtonian fluid in porous medium”, Turkish Journal of Physics, Department of Scientific Journals, The Scientific and Technical Research Council of Turkey, Vol. 30, Issue 2, pp. 103-108, 2006.

Attia, H.A., “Flow of a non-Newtonian fluid with heat transfer above a rotating disk considering the ion slip”, Chemical Engineering Communications (CEC), Taylor & Francis Group, Vol. 193, pp. 976-985, 2006.

Attia, H.A. and Ahmed, M.E.S., “Hydromagnetic impulsively lid-driven flow and heat transfer of a casson fluid”, Tamkang Journal of Science and Engineering, Tamkang University University Press, Amvo Publishing Company, Tamsui, Taiwan, Vol. 9, No. 3, pp. 195-204, 2006.

Attia, H.A., "On the effectiveness of the ion slip on the steady flow of a conducting fluid due to a porous rotating disk with heat transfer", Tamkang University University Press, Amvo Publishing Company, Tamsui, Taiwan, Vol. 9, No. 3, pp. 185-193, 2006.

Attia, H.A., “Effect of ion slip on MHD flow with heat transfer due to a rotating disk with uniform suction or injection”, Journal of the Korean Physical Society (JKPS), The Korean Physical Society, Vol. 49, No. 1, pp. 155-161, 2006.

Attia, H.A., “Time varying Hartmann flow with heat transfer between two parallel porous plates”, Proceedings of IMECE2006, Fluids Engineering Division, Rheology and Fluid Mechanics of Non Linear Materials, 2006 ASME International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers, Chicago, Illinois, pp. 1-5, Nov. 5-10, 2006.

Attia, H.A., “MHD Hartmann flow of a dusty fluid with exponential decaying pressure gradient”, Journal of Mechanical Science and Technology, Thermal Engineering.Fluid Engineering.Energy and Power Engineering, The Korean Society of Mechanical Engineers (KSME), Vol. 20, No. 8, pp. 1232-1239, 2006.

Attia, H.A., “Hall effect on unsteady hartmann flow with heat transfer under exponential decaying pressure gradient”, Journal of Mechanical Science and Technology, Thermal Engineering.Fluid Engineering.Energy and Power Engineering, The Korean Society of Mechanical Engineers (KSME), Vol. 20, No. 8, pp. 1302-1308, 2006.

Attia, H.A., “Unsteady MHD Couette flow and heat transfer of dusty fluid with variable physical properties”, Applied Mathematics and Computation, Elsevier Science Ltd., Vol. 177, No. 1, pp. 308-318, 2006.

Attia, H.A., “On the effectiveness of uniform suction and injection on steady rotating disk flow in porous medium with heat transfer”, Turkish Journal of Engineering and Enviromental Sciences, Department of Scientific Journals, The Scientific and Technical Research Council of Turkey, Vol. 30, Issue 4, pp. 231-236, 2006.

Attia, H.A., “Time varying hydromagnetic flow of dusty fluid between parallel porous plates considering the ion slip”, Journal of Technical Physics, Central European Association for Computational Mechanics, Institute of Fundamental Technological Research, Military University of Technology, Polish Academy of Sciences, Warszawa, Vol. 47, No. 3, pp. 131-147, 2006.

Attia, H.A., “Time varying hydromagnetic flow of dusty fluid between parallel porous plates considering the ion slip”, Journal of Technical Physics, Central European Association for Computational Mechanics, Institute of Fundamental Technological Research, Military University of Technology, Polish Academy of Sciences, Warszawa, Vol. 47, No. 3, pp. 131-147, 2006.

. Attia, H.A., “Time varying hydromagnetic Couette flow with heat transfer of a dusty fluid in the presence of uniform suction and injection considering the Hall effect”, Turkish Journal of Engineering and Enviromental Sciences, Department of Scientific Journals, The Scientific and Technical Research Council of Turkey, Vol. 30, Issue 5, pp. 285-297, 2006.

Attia, H.A., “Stagnation point flow towards a stretching surface through a porous medium with heat generation”, Turkish Journal of Engineering and Enviromental Sciences, Department of Scientific Journals, The Scientific and Technical Research Council of Turkey, Vol. 30, Issue 5, pp. 299-306, 2006.

Attia, H.A., “Effect of Hall current on the velocity and temperature distributions of Couette flow with variable properties”, Physica A: Statistical Mechanics and Its Applications, Elsevier Science, Ltd., Vol. 371, Issue 2, pp. 195-208, 2006.

Attia, H.A., “Hall effect on transient hartmann flow and heat transfer of a power-law fluid between parallel porous plates under exponential decaying pressure gradient”, Journal of Mechanical Engineering (STROJNICKY CASOPIS), Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovac Republic, Vol. 57, No. 2, pp. 71-94, 2006.

Attia, H.A., “On the effectiveness of uniform suction and injection on unsteady rotating disk flow in porous medium with heat transfer”, Computational Materials Science, Elsevier Science, Ltd, Vol. 38, pp. 240-244, 2006.

Attia, H.A., “Rotating disk flow in a porous medium”, Journal of Porous Medium (JPM), Begell house, Inc. publishers, Vol. 9, Issue 8, pp. 789-798, 2006.

Attia, H.A., “Investigation of the non-Newtonian micropolar fluid flow with uniform suction/blowing and heat generation”, Turkish Journal of Engineering and Enviromental Sciences, Department of Scientific Journals, The Scientific and Technical Research Council of Turkey, Vol. 30, Issue 6, pp. 359-365, 2006

Attia, H.A., “Influence of temperature dependent viscosity on the MHD Couette flow of dusty fluid with heat transfer”, Journal of Differential Equations and Nonlinear Mechanics (DENM), Hindawi Publishing Corporation, DOI 10.1155/DENM, Article ID 75290, pp. 1-14, Volume 2006.

Attia, H.A., “Ion slip effect on unsteady hartmenn flow with heat transfer under exponential decaying pressure gradient”, Journal of Mathematical Problems in Engineering (MPE), Hindawi Publishing Corporation, DOI 10.1155/MPE, Article ID 83937, pp. 1-12, Volume 2006.

Attia, H.A., “Heat transfer in a stagnation point flow of a micropolar fluid over a stretching surface with heat generation/absorption”, Tamkang Journal of Science and Engineering, Tamkang University Press, Amvo Publishing Company, Tamsui, Taiwan, Vol. 9, No. 4, pp. 299-305, 2006.

Attia, H.A., “Axisymmetric stagnation point flow towards a stretching surface through a porous medium with heat generation”, Journal of Mechanical Engineering (STROJNICKY CASOPIS), Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovac Republic, Vol. 57, No. 4, pp. 209-219, 2006.

Attia, H.A., “Numerical study of the unsteady mhd Couette flow of a viscoelastic fluid with temperature dependent viscosity in the presence of exponential decaying pressure gradient”, Journal of Mechanical Engineering (STROJNICKY CASOPIS), Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovac Republic, Vol. 57, No. 6, pp. 309-321, 2006.

Attia, H.A., “Ion slip effect on the flow due to a rotating disk with heat transfer”, Journal of Mechanical Science and Technology, Thermal Engineering.Fluid Engineering.Energy and Power Engineering, The Korean Society of Mechanical Engineers (KSME), Vol. 20, No. 12, pp. 2197-2202, 2006.

Attia, H.A., “On the effectiveness of ion slip on steady MHD flow and heat transfer above a rotating disk with Ohmic heating”, Journal of Fluids Engineering, American Society for Mechanical Engineers (ASME), Vol. 128, Issue 5, 2006.

Attia, H.A. and Seddeek, M.A., “On the effectiveness of uniform suction or injection on two dimensional stagnation point flow towards a stretching surface with heat generation”, Chemical Engineering Communications (CEC), Taylor & Francis Group, Vol. 194, Issue 4, pp. 553-564, 2007.

Attia, H.A., “On the effectiveness of porosity on stagnation point flow towards a stretching surface with heat generation”, Computational Materials Science, Elsevier Science, Ltd., Vol. 38, pp. 741-745, 2007.

AAttia, H.A., “The effect of ion slip on the flow of Reiner-Rivlin fluid due to a rotating disk with heat transfer”, Journal of Mechanical Science and Technology, Thermal Engineering.Fluid Engineering.Energy and Power Engineering, The Korean Society of Mechanical Engineers (KSME), Vol. 21, No. 1, pp. 174-183, 2007.

Attia, H.A., “Axisymmetric stagnation point flow towards a stretching surface in the presence of a uniform magnetic field with heat generation”, Tamkang Journal of Science and Engineering, Tamkang University Press, Amvo Publishing Company, Tamsui, Taiwan, Vol. 10, No. 1, pp. 11-16, 2007.

Attia, H.A., “On the effectiveness of porosity on unsteady flow between parallel plates of a viscoelastic fluid under constant pressure gradient with heat transfer”, Computational Materials Science, Elsevier Science, Ltd., Vol. 38, pp. 746-750, 2007.

Attia, H.A., “On the effectiveness of variable physical properties on the transient hydromagnetic couette-poiseulle flow”, African Journal Of Mathematical Physics (AJMP), The Moroccan Grouping in High Energy Physics (GNPHE), Vol. 4, No. 1, pp. 117-123, 2007.

Attia, H.A., “Rotating disk flow and heat transfer of a conducting non-Newtonian fluid with suction-injection and Ohmic heating”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Revista Brasileira De Ciencias Mecanicas (RBCM), The Brazilian Society of Mechanical Sciences and Engineering, Vol. XXIX, No. 2, pp. 168-173, 2007.

Attia, H.A., “Ion slip effect on the flow of a dusty fluid through a circular pipe”, Journal of Mechanical Science and Technology, Thermal Engineering.Fluid Engineering.Energy and Power Engineering, The Korean Society of Mechanical Engineers (KSME), Vol. 21, No. 3, pp. 513-517, 2007.

Attia, H.A., “Hydromagnetic flow and heat transfer above a rotating disk with uniform suction or injection considering Hall effect”, Journal of Mechanical Science and Technology, Thermal Engineering.Fluid Engineering.Energy and Power Engineering, The Korean Society of Mechanical Engineers (KSME), Vol. 21, No. 3, pp. 518-524, 2007.

Attia, H.A., “On the effectiveness of porosity on unsteady flow and heat transfer between parallel porous plates with exponential decaying pressure gradient”, Journal of Porous Medium (JPM), Begell house, Inc. publishers, Vol. 10, Issue 3, pp. 319-326, 2007.

Attia, H.A., “Hydromagnetic transient Couette flow and heat transfer in the presence of exponential decaying pressure gradient with the Hall effect”, Kragujevac Journal of Science (KJS), Faculty of Science, University of Kragujevac, Serbia & Montenegro, Vol. 29, pp. 5-14, 2007.

Ahmed, M.E.S. and Attia, H.A., “MHD flow and heat transfer of a bingham fluid in an eccentric annulus with the Hall effect”, Computer Assisted Mechanics and Engineering Sciences (CAMES), Central European Association for Computational Mechanics, Institute of Fundamental Technological Research, Polish Academy of Sciences, Vol. 14, pp. 25-42, 2007.

Abdalla, I.A., Attia, H.A. and Ahmed, M.E.S., "A domian's polynomial solution of unsteady non-newtonian MHD flow", International Journal of Applied Mathematics & Information Sciences (AMIS), Dixie W Publishing Corporation, USA, Vol. 1, No. 3, 2007.

Attia, H.A., "Analytical solution for flow of a dusty fluid in a circular pipe with Hall and ion slip effect", Chemical Engineering Communications (CEC), Taylor & Francis Group, Vol. 194, Issue 10, pp. 1287-1296, 2007.

Attia, H.A., “Velocity and temperature distributions between parallel porous plates with Hall effect and variable properties”, Chemical Engineering Communications (CEC), Taylor & Francis Group, Vol. 194, Issue 10, pp. 1355-1373, 2007.

Attia, H.A., “On the effectiveness of ion slip and uniform suction or injection on steady MHD flow due to a rotating disk with heat transfer and ohmic heating”, Chemical Engineering Communications (CEC), Taylor & Francis Group, Vol. 194, Issue 10, pp. 1396-1407, 2007.

Attia, H.A., “On the effectiveness of porosity on stagnation point flow with heat transfer over a permeable surface”, Journal of Porous Medium (JPM), Begell house, Inc. publishers, Vol. 10, Issue 6, pp. 625-631, 2007.

Attia, H.A., “On the effectiveness of variation in the physical variables on generaized Couette flow with heat transfer in a porous medium”, Research Journal of Physics, Asian Network for Scientific Information (ANSI), Academic Journals Inc., Vol. 1, No. 1, pp. 1-9, 2007.

Attia, H.A., “Time varying Hartmann flow with heat transfer of a power-law fluid with uniform suction and injection under exponential decaying pressure gradient”, International Journal for Engineering Modelling, Vol. 20, No. 1-4, pp. 29-36, 2007.

Attia, H.A., “On the effectiveness of porosity on unsteady flow between parallel plates of a viscoelastic fluid under constant pressure gradient with heat transfer”, Computational Materials Science, Elsevier Science, Ltd., Vol. 38, pp. 746-750, 2007.

Attia, H.A., “Stagnation point flow of a second grade fluid with uniform suction or blowing and heat generation”, International Journal for Engineering Modelling, Vol. 20, No. 1-4, pp. 47-53, 2007.

Attia, H.A., “Modelling of three-dimensional mechanisms using point coordinates with a recursive approach”, Applied Mathematical Modelling, Simulation and Computation for Engineering and Enviromental Systems, Elsevier Science, Ltd., Vol. 32, pp. 315-326, 2008.

Attia, H.A., "Unsteady hydromagnetic couette flow of dusty fluid with temperature dependent viscosity and thermal conductivity under exponential decaying pressure gradient", Communications in Nonlinear Science and Numerical Simulation (CNSNS), Elsevier Science, Ltd., Vol. 13, No. 6, pp. 1077-1088, 2008.

Attia, H.A., “Effect of Hall Current on transient hydromagnetic Couette-Poiseuille flow of a viscoelastic fluid with heat transfer”, Applied Mathematical Modelling, Elsevier Science, Ltd., Vol. 32, pp. 375-388, 2008.

Attia, H.A., “The effect of variable properties on the unsteady Couette flow with heat transfer considering the Hall effect”, Communications in Nonlinear Science and Numerical Simulation (CNSNS), Elsevier Science, Ltd., Vol. 13, pp. 1596-1604, 2008.

Attia, H.A., “Time varying flow of a power-law fluid in porous medium between parallel porous plates with heat transfer under exponential decaying pressure gradient”, Journal of Porous Medium (JPM), Begell house, Inc. publishers, Vol. 11, Issue 5, pp. 487-495, 2008.

Attia, H.A., “Rotating disk flow and heat transfer through a porous medium of a non-Newtonian fluid with suction and injection”, Communications in Nonlinear Science and Numerical Simulation (CNSNS), Elsevier Science, Ltd., Vol. 13, Issue 8, pp. 1571-1580, 2008.

Azim, G.A. and Attia, H.A., “Neural networks construction application to the kinematical analysis of the five-point suspension”, Journal of Mechanical Engineering (STROJNICKY CASOPIS), Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovac Republic, Vol. 59, No. 1, pp. 1-12, 2008.

Attia, H.A., “Transient MHD flow between parallel porous plates with heat transfer under exponential decaying pressure gradient and the ion slip”, Kragujevac Journal of Science (KJS), Faculty of Science, University of Kragujevac, Serbia & Montenegro, Vol. 30, pp. 5-16, 2008.

Attia, H.A., “Stagnation point flow and heat transfer of a micropolar fluid with uniform suction or blowing”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Revista Brasileira De Ciencias Mecanicas (RBCM), The Brazilian Society of Mechanical Sciences and Engineering, Vol. XXX, No. 1, pp. 51-55, 2008.

Attia, H.A., “Asymptotic solution for hydromagnetic rotating disk flow”, Kragujevac Journal of Science (KJS), Faculty of Science, University of Kragujevac, Serbia & Montenegro, Vol. 30, pp. 17-30, 2008.

Attia, H.A., “Effect of variable viscosity on transient flow of a dusty conducting fluid in a parallel-plates channel with uniform suction and injection”, Tamkang Journal of Science and Engineering, Tamkang University Press, Amvo Publishing Company, Tamsui, Taiwan, Vol. 11, No. 2, pp. 119-126, 2008.

Azim, G.A. and Attia, H.A., “Neural networks construction application to the kinematical analysis of the five-point suspension”, Journal of Mechanical Engineering (STROJNICKY CASOPIS), Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovac Republic, Vol. 59, No. 1, pp. 1-12, 2008.

Attia, H.A., “Unsteady hydromagnetic couette flow of dusty fluid with temperature dependent viscosity and thermal conductivity”, International Journal of Non-Linear Mechanics, Elsevier Science, Ltd., Vol. 43, No. 8, pp. 707-715, 2008.

Attia, H.A. and Ahmed, M.E.S., "Unsteady hydromagnetic generalized couette flow of a non-newtonian fluid with heat transfer", ASME Journal of Heat Transfer, American Society for Mechanical Engineers (ASME), Vol. 130, Issue 114504, pp. 1-5, 2008.

Attia, H.A., “Closed-form solution for mhd pipe flow of a dusty fluid”, Italian Journal of Pure and Applied Mathematics (IJPAM), Forum, Editrice Universitaria Udinese Srl, Via Palladio 8, 33100 Udine, Italy, Vol. 24, pp. 19-26, July 2008.

Attia, H.A., "Steady flow through a circular pipe of a dusty Oldroyd 8-constants fluid", International Journal of Mathematics and Computer Science (IJMCS), Vol. 3, No. 1, pp. 73-78, 2008.

Attia, H.A., “Steady flow over a rotating disk in porous medium with heat transfer”, Journal of Nonlinear Analysis: Modelling and Control (LANA), Faculty of Mathematics and Informatics, Vilnius University, Lithuania, Vol. 14, No.1, pp. 21-26, 2009.

Attia, H.A. and Ahmed, M.E.S., "Unsteady hydromagnetic generalized couette flow of a non-newtonian fluid with heat transfer", ASME Journal of Heat Transfer, American Society for Mechanical Engineers (ASME), Vol. 130, Issue 114504, pp. 1-5, 2008.

Attia, H.A., “On the effectiveness of heat generation/absorption on heat transfer in a stagnation point flow of a micropolar fluid over a stretching surface”, Kragujevac Journal of Science (KJS), Faculty of Science, University of Kragujevac, Serbia & Montenegro, Vol. 31, pp. 5-9, 2009.

Attia, H.A., “Effect of porosity on unsteady Couette flow with heat transfer in the presence of uniform suction and injection”, Kragujevac Journal of Science (KJS), Faculty of Science, University of Kragujevac, Serbia & Montenegro, Vol. 31, pp. 11-16, 2009.

Attia, H.A., “Ion slip effect on unsteady Couette flow with heat transfer under exponential decaying pressure gradient”, Tamkang Journal of Science and Engineering, Tamkang University Press, Amvo Publishing Company, Tamsui, Taiwan, Vol. 12, No. 2, pp. 209-214, 2009.

Attia, H.A., “Effect of porosity on unsteady Poiseuille flow of a viscoelastic fluid with temperature dependent viscosity”, Tamkang Journal of Science and Engineering, Tamkang University Press, Amvo Publishing Company, Tamsui, Taiwan, Vol. 12, No. 2, pp. 215-221, 2009.

Attia, H.A., “Effect of Hall current on the velocity and temperature distributions of couette flow with variable properties and uniform suction and injection”, Computational and Applied Mathematics (CAM), Brazilian Society of Applied and Computaional Mathematics, Vol. 28, No. 2, pp. 195-212, 2009.

Attia, H.A., “Hiemenz flow through a porous medium of a non-Newtonian Rivlin-Ericksen fluid with heat transfer”, Tamkang Journal of Science and Engineering, Tamkang University Press, Amvo Publishing Company, Tamsui, Taiwan, Vol. 12, No. 3, pp. 359-364, 2009.

Attia, H.A., “The effect of suction and injection on unsteady Couette flow with variable properties”, Kragujevac Journal of Science (KJS), Faculty of Science, University of Kragujevac, Serbia & Montenegro, Vol. 32, pp. 17-24, 2010.

Attia, H.A. and Ewis, K.M., “Three dimensional axis-symmetric stagnation point flow towards a stretching surface in the presence of uniform suction or blowing with heat generation”, ASME Tenth International Congress of Fluid Dynamics (ICFD10), Ain Soukhna, Egypt, Dec. 2010.

Attia, H.A., "Steady three-dimensional hydromagnetic stagnation point flow towards a stretching sheet with heat generation", Italian Journal of Pure and Applied Mathematics (IJPAM), Forum, Editrice Universitaria Udinese Srl, Via Palladio 8, 33100 Udine, Italy, Vol. 27, pp. 9-18, 2010.

Attia, H.A. and Ahmed, M.E.S., “Transient MHD Couette flow of a Casson fluid between parallel plates with heat transfer”, Italian Journal of Pure and Applied Mathematics (IJPAM), Forum, Editrice Universitaria Udinese Srl, Via Palladio 8, 33100 Udine, Italy, Vol. 27, pp. 19-38, 2010.